Sharp XV-Z7000U XVZ7000U Operation Manual - Page 13
Connecting the Projector to a Computer
View all Sharp XV-Z7000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Setup & Connections Connecting the Projector Connecting the Projector to a Computer You can connect your projector to a computer for projection of full color computer images. Connecting a computer using the standard 15-pin video and audio input 1 Connect one end of the computer RGB cable to the INPUT 2 RGB/COMPONENT port on the projector. Secure the connector by tightening the thumb screws. 2 Connect the other end to the Monitor output port on the computer. Secure the connector by tightening the thumb screws. 3 To use the built-in audio system, connect one end of the computer audio cable to the AUDIO INPUT (INPUT 1, 2) terminal on the projector. 4 Connect the other end to the Audio output terminal on the computer. CAUTION • Before connecting, be sure to turn both the projector and the computer off. After making all connections, turn the projector on first. The computer should always be turned on last. RS-232C INPUT 1 /COMPONENT AUDIO INPUT Y PB PR (INPUT 1, 2) INPUT 2 RGB /COMPONENT • Please read the computer's operation manual carefully. • Refer to page 45 "Computer Compatibility Chart" for a list of computer signals compatible with the projector. Use with computer signals other than those listed may cause some of the functions not to work. • A Macintosh adaptor may be required for use with some Macintosh computers. Contact your nearest Authorized SharpVision Service Center or Dearler. When connecting this projector to a computer, select "RGB" by using RGB/COMPONENT on the remote control or the GUI menu. (See page 25.) Connecting other compatible computers When connecting the projector to a compatible computer other than an IBM-PC (VGA/SVGA/XGA/SXGA) or Macintosh (i.e. Workstation), a separate cable may be needed. Please contact your dealer for more information. When connecting this projector to a computer, select "RGB" by using RGB/COMPONENT on the remote control or the GUI menu. (See page 25.) • Connecting computers other than the recommended types may result in damage to the projector, the computer, or both. "Plug and Play" function • This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC compatible computer will communicate their setting requirements, allowing for quick and easy setup. • Before using the "Plug and Play" function, be sure to turn on the projector first and the connected computer last. • The DDC, Plug and Play function of this projector operates only when used in conjunction with a VESA DDC compatible computer. E-13