Sharp XV-Z21000 User Manual - Page 11

Introduction Projector (Rear View) Intake vent 47 Kensington Security Standard connector Exhaust vent 47 Remote control 11 sensor AC socket 25 Connect the supplied power cord.  Terminals   47 Intake vent     Terminal 1 2 3 4 5 6 7 8 Description COMPONENT/RGB1, 2 terminals Connecting video equipment with component output terminal (DVD player, etc.) or a computer with analog RGB output terminal. S-VIDEO terminal Connecting video equipment with S-video output terminal (DVD player, VCR, etc.). VIDEO terminal Connecting video equipment without S-video output terminal. DVI terminal Connecting video equipment with DVI output terminal (DVD player, DTV decoder, computer, etc.). HDMI1, 2 terminals Connecting video equipment with HDMI output terminal. RS-232C terminal Connecting a computer to control the projector. TRIGGER terminal When the projector is turned on, a control signal (DC 12V) outputs from this terminal. If an electric screen or other compatible device is connected, it can be turned on when the projector is turned on. WIRED REMOTE control input terminal Connecting the remote control via a cable when the projector is placed out of the reach of remote control signals. Page 20, 21 22 22 18-20, 23 18 24 - 10 Using the Kensington Lock • This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions on how to use it to secure the projector. -9