Sharp XV-Z12000 XVZ12000 Operation Manual - Page 20
Connecting to RGB Video, Equipment Using a 5 RCA, RGB Cable INPUT 1 or 2, Equipment Using the DVI - hd
View all Sharp XV-Z12000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Connecting to RGB Video Equipment Using a 5 RCA RGB Cable (INPUT 1 or 2) Use a 5 RCA RGB cable when connecting the RGB video equipment such as DVD players and DTV* decoders to INPUT 1 or 2 terminals. * DTV is the umbrella term used to describe the new digital television system in the United States. 1 Connect a 5 RCA RGB cable to the projector. 2 Connect the above cable to the RGB video equipment. Note • When connecting the projector to the video equipment in this way, select "RGB" for "Signal Type" in the "Options" menu, or select the RGB mode by pressing on the remote control. See page 69. • The (HD/C sync) and (VD) terminals may be used depending on the specifications of the DTV decoder connected to this projector. Please refer to the operation manual of the DTV decoder for details. Connecting to RGB Video Equipment Using the DVI to 15-pin D-sub Adaptor and the RGB Cable (INPUT 5) 1 Connect a DVI to 15-pin D-sub adaptor to the projector. 2 Connect the above adaptor to an RGB cable. 3 Connect the above cable to the RGB video equipment. • Secure the connectors by tightening the thumbscrews. Note • When connecting the projector to the video equipment in this way, select "A. RGB" for "Signal Type" in the "Options" menu, or select the A. RGB mode by pressing on the remote control. See page 69. XV_Z12000_E_US_p15_26.p65 19 To INPUT 1 or 2 terminals 5 RCA RGB cable (Commercially available) To analog RGB output terminal DVD player or DTV* decoder Optional accessory DVI to 15-pin D-sub adaptor Type: AN-A1DV (7.9" (20 cm)) To INPUT 5 terminal DVI to 15-pin D-sub adaptor (sold separately) RGB Cable (commercially available) To RGB output terminal 03.9.29, 11:35 AM DVD player or DTV* decoder -19 Connections and Setup