Sharp XV-Z10000U XVZ10000U Operation Manual - Page 78
Removing and Install, ing the Lamp Unit
![]() |
UPC - 074000358836
View all Sharp XV-Z10000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Regarding the Lamp Removing and Installing the Lamp Unit Info • Be sure to remove the lamp unit by the handle. Be sure not to touch the glass surface of the lamp unit or the inside of the projector. • To avoid injury to yourself and damage to the lamp, be sure to carefully follow the steps below. • Do not loosen other screws except for the lamp unit cover and lamp unit. (Only the silver screws are loosened). • Please refer to the installation manual included with the lamp unit. 1 Press on the projector or on the remote control to turn off the power. • Wait until the cooling fan stops. Warning! • Do not remove the lamp unit from the projector right after use. The lamp will be very hot and may cause burn or injury. 2 Disconnect the power cord. • Unplug the power cord from the AC socket. • Leave the lamp until it has fully cooled down (about 1 hour). Lamp unit BQC-XVZ100001 Appendix 3 Remove the lamp unit cover. • Loosen the user service screw that secures the lamp unit cover. Then open the cover in the direction of the arrow. XV-Z10000#Print#p71_84.p65 77 User service screws -77 02.10.25, 7:34 PM
![](/manual_guide/products/sharp-xvz10000u-xvz10000u-operation-manual-e3c0ad8/78.png)