Sharp XG-P20XUL XG-P20XU Operation Manual - Page 50
Adjusting the Computer Images (RGB menu only
View all Sharp XG-P20XUL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Adjusting the Computer Images (RGB menu only) When displaying computer patterns which are very detailed (tiling, vertical stripes, etc.), interference may occur between the LCD pixels, causing flickering, vertical stripes, or contrast irregularities in portions of the screen. Should this occur, adjust "Clock", "Phase", "H-Pos" and "V-Pos" for the optimum computer image. See page 44 for the procedure details. Select the desired computer input mode with INPUT 1 or 2. Clock Adjusts vertical noise. Phase Adjusts horizontal noise (similar to tracking on your VCR). H-Pos Centers the on-screen image by moving it to the left or right. V-Pos Centers the on-screen image by moving it up or down. • Computer image adjustments can be made easily by pressing AUTO SYNC ( ). See page 51 for details. • To reset all adjustment items, select "Reset" on the "Fine Sync" menu screen and press ENTER. Saving and Selecting Adjustment Settings This projector allows you to store up to seven adjustment settings for use with various computers. Once these settings are stored, they can be easily selected each time you connect a computer to the projector. Saving the adjustment setting Selecting a saved setting Basic Operation • If a memory position has not been set, a resolution and frequency setting will not be displayed. • When selecting the stored adjustment setting with "Select Setting", the computer system should match the stored setting. E-49