Sharp XG-C435X-L XG-C435XL XG-C465XL Operation Manual - Page 29
Controlling the Projector by a Computer
View all Sharp XG-C435X-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Controlling the Projector by a Computer When the RS-232C terminal on the projector is connected to a computer, the computer can be used to control the projector and check the status of the projector. Refer to the "SETUP MANUAL" contained on the supplied CD-ROM for "RS-232C Specifications and Commands". When connecting to a computer using an RS-232C serial control cable and a DIN-D-sub RS-232C adaptor Supplied accessory DIN-D-sub RS232C adaptor Computer To RS-232C terminal To RS-232C terminal DIN-D-sub RS-232C adaptor RS-232C serial control cable (cross type, commercially available) Note • The RS-232C function may not operate if your computer terminal is not correctly set up. Refer to the operation manual of the computer for details. Info • Do not connect the RS-232C cable to a port other than the RS-232C terminal on the computer. This may damage your computer or projector. • Do not connect or disconnect an RS-232C serial control cable to or from the computer while it is on. This may damage your computer. Connections -27