Sharp UX-A260U UX-A260 Operation Manual - Page 59
Sending a Fax From Memory
View all Sharp UX-A260U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Sending a Fax From Memory 3. Sending Faxes Sending a Fax From Memory You can scan a document into the fax's memory and send the document from memory. This increases transmission speed and allows you to send a fax to multiple destinations in a single operation. After transmission, the document is automatically cleared from memory. Broadcasting (sending a fax to multiple destinations) This function allows you to send the same fax to as many as 20 different locations in just one operation. ♦ When sending to multiple locations, only auto-dial numbers can be used to dial the numbers of the receiving machines. 1 Load the document(s). • If desired, press RESOLUTION/ RECEPTION MODE to set the resolution and/or contrast. 2 Press START/MEMORY . 3 Select a destination using one of the following methods: Press SPEED and enter a 2-digit Speed Dial number. Press (or ) until the name of the number appears in the display (if no name was stored, the number will appear). 4 Press to select the number. 5 Repeat Steps 3 and 4 for each of the other locations to which you wish to send the fax (maximum of 20). • To check your selected locations, press to scroll through them. To STOP delete a location, scroll to the location and then press . 57