Sharp UX 510 UX-500 UX-510 Operation Manual - Page 17
TEL. LINE, TEL. SET, Comments, insert it into - a
UPC - 074000031609
View all Sharp UX 510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Chapter 1 Installation 3 Connect the handset as shown and place it on the handset rest. Handset TSEELT. TLIENLE. 4 Insert one end of the telephone line cord into the TEL. LINE jack. Insert the other end into a standard (RJ11C) single-line telephone wall jack. Be sure to insert the telephone line cord into the TEL. LINE jack. Do not insert it into the TEL. SET jack. Wall jack Comments: • Your fax is set for touch-tone dialing. If you are on a pulse dial (rotary) line, you must set the fax for pulse dialing by changing Option Setting 8. This procedure is described in Chapter 9, "Optional Settings". • If you intend to use a computer fax modem on the same phone line, you must reset Option Setting 13 to OFF in order to prevent transmission and reception errors. This procedure is described in Chapter 9, "Optional Settings". 7