Sharp SD-EX220 SDEX220 Operation Manual - Page 16

SD-EX220 General control „ Volume control Press the VOLUME (+ or -) button to increase or decrease the volume. 0 1 2 ..... 39 40 „ Bass control 1 Press the BASS/TREBLE button to select "BASS". 2 Within 3 seconds, press the VOLUME (+ or -) button to adjust the bass. -5 +5 Preparation for Use - General control - „ To turn the power on Press the ON/STAND-BY button to turn the power on. If the power does not turn on, check the AC power cord is plugged in properly. After use: Press the ON/STAND-BY button to enter the power stand-by mode. Note: Do not turn on the power immediately after entering the power stand-by mode. Wait a while. „ To change the display brightness (2 levels) When the power is on, you can switch the display brightness by pressing the DISPLAY button on the remote control. For example, CD function „ Treble control 1 Press the BASS/TREBLE button to select "TREBLE". 2 Within 3 seconds, press the VOLUME (+ or -) button to adjust the treble. -5 +5 „ Surround Press the SURROUND button to enjoy music that seems to surround you. "SURROUND" will appear. To cancel the surround mode, press the SURROUND button again. SURROUND indicator "SURROUND" will go out. Dimmer on Dimmer off 16