Sharp R-K12S30 Installation Instructions - Page 1
Sharp R-K12S30 Manual
View all Sharp R-K12S30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
INSTALLATION INSTRUCTIONS BUILT-IN KIT MODEL RK-12S30 IMPORTANT: This Built-In Kit is designed for use with Sharp SuperSteam Ovens specifying a RK-12S30 Built-In Kit on the rating label on the front of the oven. The cabinet or wall opening must be within the following dimensions: HEIGHT 19" to 19 1/8" (482 mm - 486 mm) WIDTH 28" to 28 1/4" (710 mm - 719 mm) DEPTH 23 1/4" minimum (509.5 mm minimum) The completed built-in kit frame assembly dimensions: HEIGHT 19 1/2" (495mm) WIDTH 30" (762mm) NOTE: The bottom of the cut-out opening for built-in use must be 36 inches (915 mm) or higher from the floor. PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION! The electrical requirements for this oven are 120 volts, 15 amps. The oven has a 5-15 plug and requires a 5-15 receptacle. PROVIDED PARTS PART NAME Q'TY EXHAUST DUCT BACK EXHAUST DUCT UPPER RECTIFIER PLATE L DIVIDE PLATE L DIVIDE PLATE R EXHAUST EXHAUST DUCT LEFT DUCT RIGHT EXHAUST DUCT BOTTOM REAR SPACER FRAME ASSEMBLY SCREW (A) - SHORT SCREW (B) - MIDDLE SCREW (C) - LONG * For walls other than wood, you may need screws appropriate for that wall to install the frame. * Be sure to DISCONNECT THE PLUG of the oven from the electrical outlet before installing the oven and kit. * Because the kits are metal, due caution should be used in handling and installation to avoid the possibility of injury. 1 EXHAUST DUCT BACK PDVC-B107WRWZ 1 EXHAUST DUCT UPPER PDVC-B105WRWZ 1 DIVIDE PLATE L PSKR-A486WRWZ 1 DIVIDE PLATE R PSKR-A487WRWZ 1 RECTIFIER PLATE L PSKR-A484WRWZ 1 EXHAUST DUCT LEFT PDVC-B108WRWZ 1 EXHAUST DUCT RIGHT PDUC-B117WRWZ 1 EXHAUST DUCT BOTTOM PDVC-B106WRWZ 1 FRAME ASSEMBLY FDEC-A004WRKZ 1 SCREW(A) XHTS740P08000 23 SCREW(B) XMMS841P13000 2 SCREW(C) XMSS827P25000 4 REAR SPACER PSPAFA003WRWZ 1 CUSHION 1 5/8" x 16", 15 mm x 405 mm 2 PCUS-A245WRPZ CUSHION 2 1/4" x 24 3/8", 5 mm x 618 mm 1 PCUS-A247WRPZ CUSHION 3 1 1/8" x 27 1/8", 30 mm x 689 mm 1 PCUS-A249WRPZ CUSHION 4 1/4" x 12", 5 mm x 305 mm 1 PCUS-A251WRPZ CUSHION 5 1/4" x 15", 5 mm x 382 mm 1 PCUS-A253WRPZ TINSEB184WRRZ-D92 Printed in Thailand