Sharp R-4S1FH Service Manual - Page 6
General Information, Specification
![]() |
View all Sharp R-4S1FH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
R-4S1FH ITEM PowerRequirements Power Output Case Dimensions Cooking Cavity Dimensions 1.6 Cubic Feet Control Complement Oven Cavity Light Safety Standard SPECIFICATION 120 Volts 13.0 Amperes, 1550 watts 60 Hertz Single phase, 3 wire grounded DESCRIPTION 1000 watts (IEC 705 TEST PROCEDURE) Operating frequency of 2450MHz Width 21-11/16" Height 12-3/8" Depth 18-3/8" Width 15-23/32" Height 9-21/32" Depth 17-7/8" Touch Control System Clock ( 1:00 - 12:59 ) Timer (0 - 99 min. 99 seconds) Microwave Power for Variable Cooking Repetition Rate; P-HI Full power throughout the cooking time P-90 approx. 90% of Full Power P-80 approx. 80% of Full Power P-70 approx. 70% of Full Power P-60 approx. 60% of Full Power P-50 approx. 50% of Full Power P-40 approx. 40% of Full Power P-30 approx. 30% of Full Power P-20 approx. 20% of Full Power P-10 approx. 10% of Full Power P-0 No power throughout the cooking time MINUTE PLUS pad, Cook center pads, Defrost center pads, Number selection pads, Power Level pad, Timer/Clock pad,Stop/Clear pad, START pad, and Popcorn. Yes UL Listed FCC Authorized DHHS Rules, CFR, Title 21, Subchapter J GENERAL INFORMATION GROUNDING INSTRUCTIONS This oven is equipped with a three prong grounding plug. It must be plugged into a wall receptacle that is properly installed and grounded in accordance with the National Electrical Code and local codes and ordinances. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. WARNING: Improper use of the grounding plug can result in a risk of electric shock. Electrical Requirements The electrical requirements are a 120 volt 60 Hz, AC only, 15 or 20 amp. fused electrical supply. It is recommended that a separate circuit serving only this appliance be provided. When installing this appliance, observe all applicable codes and ordinances. A short power-supply cord is provided to reduce risks of becoming entangled in or tripping over a longer cord. Where a two-pronged wall-receptacle is encountered, it is the personal responsibility and obligation of the customer to contact 4
![](/manual_guide/products/sharp-r4s1fh-service-manual-1292e4a/6.png)