Sharp R-310JW R-308JK/JW/JS , R-309JW , R-310JK/JW Operation Manual - Page 19
Cleaning And Care
View all Sharp R-310JW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
OTHER CONVENIENT FEATURES AUDIBLE SIGNAL ELIMINATION If you wish to have the oven operate with no audible signals, touch TIMER/CLOCK, the number 5 and then touch the START pad and hold for three seconds. To cancel, touch TIMER/CLOCK, the number 5 and STOP/CLEAR pads. CLEANING AND CARE DEMONSTRATION MODE To demonstrate, touch TIMER/CLOCK, the number 0 and then touch the START pad and hold for 3 seconds. S HO will appear in the display. Cooking operations and specific special features can now be demonstrated with no power in the oven. For example, touch MINUTE PLUS pad and the display will show 1.00 and count down quickly to . To cancel, touch TIMER/CLOCK, the number 0 and STOP/CLEAR pads. If easier, unplug the oven from the electrical outlet and replug. Disconnect the power cord before cleaning or leave the door open to inactivate the oven during cleaning. Exterior The outside surface is painted. Clean the outside with mild soap and water; wipe with a soft cloth. Do not use any type of household or abrasive cleaner. Door Wipe the window on both sides with a soft damp cloth to remove any spills or spatters. Metal parts will be easier to maintain if wiped frequently with a soft damp cloth. Avoid the use of spray and other harsh cleaners as they may stain, streak or dull the door surface. Touch Control Panel Wipe the panel with a soft cloth dampened slightly with water only. Dry with a soft cloth. Do not scrub or use any sort of chemical cleaners. Close door and touch STOP/CLEAR pad. Interior Cleaning is easy because little heat is generated to the interior surfaces; therefore, there is no baking and setting of spills or spattering. To clean the interior surfaces, wipe with a soft damp cloth. DO NOT USE ABRASIVE OR HARSH CLEANERS OR SCOURING PADS. For heavier soil, use baking soda or a mild soap; wipe clean with a soft damp cloth. NEVER SPRAY OVEN CLEANERS DIRECTLY ONTO ANY PART OF THE OVEN. Waveguide Cover The waveguide cover is made from mica so requires special care. Keep the waveguide cover clean to assure good oven performance. Carefully wipe with a soft damp cloth any food spatters from the surface of the cover immediately after they occur. Built-up splashes may overheat and cause smoke or possibly catch fire. Do not remove the waveguide cover. Odor Removal Occasionally, a cooking odor may remain in the oven. To remove, combine 1 cup water, grated peel and juice of 1 lemon and several whole cloves in a 2-cup glass measuring cup. Boil for several minutes using 100% power. Allow to set in oven until cool. Wipe interior with a soft cloth. Turntable/ Turntable Support The turntable and turntable support can be removed for easy cleaning. Wash them in mild, sudsy water; for stubborn stains use a mild cleanser and a non-abrasive scouring sponge. They are also dishwasher-proof. Use upper rack of dishwasher. The turntable motor shaft is not sealed, so excess water or spills should be wiped up immediately. 17 Exterior Interior Turntable Turntable Support