Sharp PN-Y496 PN-Y326 PN-Y436 PN-Y496 PN-Y556 Quick Start Guide - Page 9
Turning Power On/Off
View all Sharp PN-Y496 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
ENGLISH Turning Power On/Off Caution • Turn on the monitor first before turning on the computer or playback device. • When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds. A short interval may result in a malfunction. Turning power on/off Press the POWER button to turn the power ON/OFF. Turning on the main power When the main power is turned on, the power LED lights. Wait until the screen is displayed. POWER button Main power switch Caution • The main power must be turned on/off with the main power switch. Do not connect/disconnect the power cord or turn the breaker on/off while the main power switch is on. • For a complete electrical disconnection, pull out the main plug. Status Green lit Orange lit Green flashing Power LED Status of the monitor Power on Power off (Standby mode) Input signal waiting mode nDate/time setting • If the time has not been set, such as when the monitor is first turned on, set the date and time in DATE/TIME SETTING of the SETUP menu. Be sure to set the date and time. TIPS • Set the time on a 24-hour basis. • The clock stops if the main power remains off for about 1 week.* (* Approximate time. The actual time varies depending on the state of the monitor.) 7E