Sharp PN-Y425 Operation Manual - Page 21
Playing the Files in a USB Flash Drive, Auto playback, Playing files
View all Sharp PN-Y425 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Playing the Files in a USB Flash Drive A USB flash drive can be inserted in the monitor to display images, videos, and music in the USB flash drive on the monitor. For information on USB flash drive, see page 12. Auto playback The image files or video files in a USB flash drive can be automatically played. Create a folder with the name "autoplay" in the top level of the USB flash drive. Files in the "autoplay" folder that meet the criteria below play automatically. (Supported formats and file names are different from other playback.) Format Image files : *.jpg *1 or Video files : *.wmv *1 File name 001.jpg - 030.jpg *2 or 001.wmv - 030.wmv *2 (Files are played by number in ascending order. If a number is missing in the sequence, that number is skipped.) Number of files Up to 30. *1 For details, see "Supported formats" at right. *2 File extension must be in lowercase. Caution • Mixed playback of image files and video files is not possible. To display a mix of image files and video files, see "SCHEDULE" (see page 30). TIPS • During auto play, it is better to turn the power ON/OFF using the remote control unit. When the power is turned ON/OFF using the main power switch, it takes a longer time until auto play is started. It also takes a longer time for playback to start from STANDBY MODE and LOW POWER. n Preparations Set the type of files for auto play. 1. Change an input mode to other than [USB]. (See page 19.) 2. Press MENU and select SETUP with or . 3. Press ENTER and select AUTO PLAY with or . 4. Press ENTER and select PHOTO or MOVIE with or . 5. Press . ENTER 6. Press . MENU n Auto playback of files 1. Connect a USB flash drive (see page 12) and turn the power ON. You can connect a USB flash drive (see page 12) after turning the power ON. TIPS • Auto play will not start if a folder, file format, or file name indicated in "Auto playback" is not correctly set, and if AUTO PLAY is not correctly set in the monitor settings menu. n To stop auto play 1. Press . INPUT Playing files You can play the specified image/video/ audio files in a USB flash drive. 1. Insert the USB flash drive into a USB port on the monitor. (See page 12.) 2. Change an input mode to [USB]. (See page 19.) 3. Select the files to be played, and the play method. (See page 22.) n Supported formats The types of files that can be played in USB flash drive are as follows: The operation of formats not indicated in the table is not guaranteed. Image files Extension Display capability *.jpg (*.jpeg) *1 Size