Sharp PN-Y326 PN-Y326 PN-Y436 PN-Y496 PN-Y556 Quick Start Guide - Page 7
Emounting Precautions - 32
View all Sharp PN-Y326 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ENGLISH MOUNTING PRECAUTIONS • This product is for use indoors. • A mounting bracket compliant with VESA specifications is required. • Since the monitor is heavy, consult your dealer before installing, removing or moving the monitor. • Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized SHARP dealer. You should never attempt to perform any of this work yourself. Our company will bear no responsibility for accidents or injuries caused by improper mounting or mishandling. • Use the monitor with the surface perpendicular to a level surface. If necessary, the monitor may be tilted up to 20 degrees upward or downward. • This monitor should be used at an ambient temperature between 32°F (0°C) and 104°F (40°C). Provide enough space around the monitor to prevent heat from accumulating inside. For the monitor in landscape orientation Unit: inch [mm] 7-7/8 [200] • Adhere to the following when installing the monitor in its portrait orientation. Failing to adhere to the following may cause malfunctions. - Install the monitor such that the power LED is located on the top side. - S et the THERMAL SENSOR SETTING on the SETUP menu to PORTRAIT. (See OPERATION MANUAL.) - Be sure to clamp the power cord (supplied) by using the supplied cable clamp (affixing type). When clamping the power cord, take care not to stress the terminal of the power cord. Do not bend the power cord excessively. 2 2 [50] [50] 2 [50] 5/16 [7] For the monitor in portrait orientation Unit: inch [mm] 7-7/8 [200] 5/16 [7] Power LED 2 2 [50] [50] 2 [50] • If it is difficult to provide sufficient space for any reason such as the installation of the monitor inside a housing or of several units side-by-side, or if the ambient temperature may be outside of the range of 32°F (0°C) to 104°F (40°C), install a fan or take other measures to keep the ambient temperature within the required range. When installing two or more monitor units side-by-side, provide space of at least 3/16 inch (5 mm) around them to prevent stress on the adjacent unit or structure due to thermal expansion. • Do not block any ventilation openings. If the temperature inside the monitor rises, this could lead to a malfunction. • Do not place the monitor on a device which generates heat. Flat installation • When using the monitor laying flat on a surface (when the monitor is tilted 20 degrees or more upward or downward from the perpendicular in relation to a level surface), consult an authorized SHARP dealer because there are some specific mounting conditions. Adhere to the following. Failing to adhere to the following may cause malfunctions. - S et THERMAL SENSOR SETTING in the monitor setting menu to FACE UP or FACE DOWN. (See OPERATION MANUAL.) - U se the monitor at the ambient temperature within the range of 32°F (0°C) to 86°F (30°C). Provide 7-7/8 inch (200 mm) or more space between the monitor and the ceiling or other mounting surfaces and surrounding objects to prevent heat from accumulating inside. If it is difficult to provide sufficient space or if the ambient temperature may be outside of the range of 32°F (0°C) to 86°F (30°C), install a fan or take other measures to keep the ambient temperature within the required range. - Do not press hard on the LCD panel or otherwise subject it to impacts. Flat installation (UPWARD) 7-7/8 [200] 7-7/8 [200] Unit: inch [mm] 7-7/8 [200] 7-7/8 [200] 7-7/8 [200] Flat installation (DOWNWARD) 7-7/8 [200] Unit: inch [mm] 7-7/8 [200] 7-7/8 [200] 7-7/8 [200] 7-7/8 [200] 5E