Sharp PN-UH551 PN-UH861 PN-UH551 PN-UH501 PN-UH431 Operation Manual - Page 25

Auto Play See Front Indicator Light

Get Sharp PN-UH551 PDF manuals and user guides View all Sharp PN-UH551 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

Menu Items Screen Auto (D-SUB) The "Clock", "Phase", "H-Pos.", and "V-Pos." are automatically adjusted. Pressing the ENTER button performs adjustment. Use this automatic adjustment when you use the D-SUB to display a computer screen for the first time or when you change the setting of the computer. (See page 28.) H-Pos. (D-SUB) Adjust the horizontal position of the image. V-Pos. (D-SUB) Adjust the vertical position of the image. Clock (D-SUB) Adjusts frequency for sampling clock for applicable video. Adjust when there is flickering in the form of vertical stripes. When using the adjustment pattern (see page 28), make adjustments so that no vertical stripe noise appears in it. Phase (D-SUB) Adjusts sampling clock phase for applicable video. Useful when small characters appear with low contrast and/or there are flickers at corners. When using the adjustment pattern (see page 28), make adjustments so that no horizontal stripe noise appears in it. * Adjustments to "Phase" should be made only after "Clock" has been correctly set. Reset Resets the values of the "Screen" items to the factory default settings. Select "Yes" and then press the ENTER button. No signal off Sets whether or not the monitor power off when there is no input signal for more than 10 minutes. Power save mode When "Off" is selected, startup time from standby mode is reduced. Note, however, that more power will be consumed in standby mode. When "On" is selected, current consumption is reduced while the monitor is in standby mode. Note, however, that the startup time from standby mode becomes longer. If set to "On", certain RS-232C commands and LAN control cannot be used in standby mode. (See pages 29 and 32.) Monitor button lock You can disable all monitor buttons. To disable "Monitor button lock", press the DISPLAY button until "F" appears in the upper left corner of the screen. Then, press the , , and buttons in this sequence before "F" disappears. RC control lock You can disable the remote control buttons. To disable "RC control lock", press the DISPLAY button until "F" appears in the upper left corner of the screen. Then, press the , , and buttons in this sequence before "F" disappears. You can also disable "RC control lock" by disconnecting the power cord from the power outlet, and then reconnecting the power cord to the power outlet while pressing the POWER button on the monitor. Use this method to disable when auto play has been set in Media Player. Front Indicator Light Specifies whether to light the power LED. Auto Play (See page 21.) Set the type of file to be automatically played from a USB flash drive. Information Displays monitor information. All reset Resets all the settings to the factory default settings. 25 E

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
25
E
Menu Items
Screen
Auto (D-SUB)
The “Clock”, “Phase”, “H-Pos.”, and “V-Pos.” are automatically adjusted.
Pressing the ENTER button performs adjustment. Use this automatic adjustment when you use the D-SUB to display a
computer screen for the first time or when you change the setting of the computer. (See page 28.)
H-Pos. (D-SUB)
Adjust the horizontal position of the image.
V-Pos. (D-SUB)
Adjust the vertical position of the image.
Clock (D-SUB)
Adjusts frequency for sampling clock for applicable video.
Adjust when there is flickering in the form of vertical stripes.
When using the adjustment pattern (see page 28), make adjustments so that no vertical stripe noise appears in it.
Phase (D-SUB)
Adjusts sampling clock phase for applicable video. Useful when small characters appear with low contrast and/or there are
flickers at corners. When using the adjustment pattern (see page 28), make adjustments so that no horizontal stripe noise
appears in it.
* Adjustments to “Phase” should be made only after “Clock” has been correctly set.
Reset
Resets the values of the “Screen” items to the factory default settings.
Select “Yes” and then press the ENTER button.
No signal off
Sets whether or not the monitor power off when there is no input signal for more than 10 minutes.
Power save mode
When “Off” is selected, startup time from standby mode is reduced. Note, however, that more power will be consumed in
standby mode.
When “On” is selected, current consumption is reduced while the monitor is in standby mode. Note, however, that the startup
time from standby mode becomes longer.
If set to “On”, certain RS-232C commands and LAN control cannot be used in standby mode. (See pages 29 and 32.)
Monitor button lock
You can disable all monitor buttons.
To disable “Monitor button lock”, press the DISPLAY button until “F” appears in the upper left corner of the screen. Then, press
the
,
,
and
buttons in this sequence before “F” disappears.
RC control lock
You can disable the remote control buttons.
To disable “RC control lock”, press the DISPLAY button until “F” appears in the upper left corner of the screen. Then, press the
,
,
and
buttons in this sequence before “F” disappears. You can also disable “RC control lock” by disconnecting the
power cord from the power outlet, and then reconnecting the power cord to the power outlet while pressing the POWER button
on the monitor. Use this method to disable when auto play has been set in Media Player.
Front Indicator Light
Specifies whether to light the power LED.
Auto Play (See page 21.)
Set the type of file to be automatically played from a USB flash drive.
Information
Displays monitor information.
All reset
Resets all the settings to the factory default settings.