Sharp PN-UH501 PN-UH861 PN-UH551 PN-UH501 PN-UH431 Quick Start Setup Gui - Page 12

Mounting Precautions (For SHARP dealers and service engineers) • When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people. (PN-UH861: at least 3 people.) • Be sure to use a wall-mount bracket designed or designated for mounting the monitor. • This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials such as plaster / thin plastic board / wood before starting installation. • This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor. Install by the most suitable method for the material and the structure. • To attach a VESA-compliant mounting bracket, remove the screws attached to screw holes for mounting brackets. Do not use the removed screws to attach the mounting bracket. (PN-UH861 ONLY) • To attach a VESA-compliant mounting bracket, use M8 [PN-UH861] or M6 [PN-UH551/PN-UH501/PN-UH431] screws that are 11/16 inch (18 mm) to 13/16 inch (20 mm) [PN-UH861] or 5/16 inch (8 mm) to 3/8 inch (10 mm) [PN-UH551/PN‑UH501/ PN-UH431] longer than the thickness of the mounting bracket. 11/16 inch (18 mm) to 13/16 inch (20 mm) [PN-UH861] 5/16 inch (8 mm) to 3/8 inch (10 mm) [PN-UH551/PN-UH501/PN-UH431] Screws (M8 [PN-UH861] or M6 [PN-UH551/PN-UH501/PN-UH431]) Mounting bracket Monitor mounting • Do not use an impact driver. • When moving the monitor, be sure to hold the parts marked by product damage, failure, or injury. [PN-UH861] below. Do not hold the LCD panel. This may cause [PN-UH551/PN-UH501/PN-UH431] • After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount. • Do not use any screw holes other than those for mounting brackets, located on the rear of the monitor, for installation. E 10