Sharp PN-R703 Operation Manual - Page 16
Turning Power On/Off, Turning on the main power, Turning power on/off
View all Sharp PN-R703 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Turning Power On/Off Caution • Turn on the monitor first before turning on the PC or playback device. Turning on the main power Turning power on/off Press the POWER button or POWER switch to turn the power ON/OFF. Main power switch Caution • The main power must be turned on/off with the main power switch. Do not connect/disconnect the power cord or turn the breaker on/off while the main power switch is on. • When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds. • For a complete electrical disconnection, pull out the main plug. Status Green lit Orange lit Green flashing Power switch Power LED Status of the monitor Power on Power off (Standby mode) Input signal waiting mode It is possible to check the power LED even when the operation panel is stored inside the monitor. Power LED Caution • When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds. A short interval may result in a malfunction. TIPS • When the main power switch is off, the monitor cannot be turned on. • If the monitor is in the input signal standby mode and you press the POWER button on the remote control unit, the monitor enters standby mode. • Setting the SCHEDULE flashes the power LED alternately in red and orange in standby mode. • To disable the logo screen from displaying when turning the power ON, set LOGO SCREEN to OFF on the OTHERS menu. (See page 28.) E 16