Sharp PN-R606 PN-R Series Quick Start Guide - Page 8

Connections Caution • Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting cables. Also, read the manual of the equipment to be connected. • Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables connected to the input and output terminals may cause malfunctions and the other problems. 1 Power cord (Supplied) 8 9 10 11 12 13 14 2 3 4 56 7 1. AC input terminal 2. DisplayPort output terminal 3. HDMI1 input terminal 4. HDMI2 input terminal 5. DisplayPort input terminal 6. DVI-D input terminal 7. D-sub input terminal 8. Power supply terminal 9. LAN terminal 10. RS-232C output terminal 11. RS-232C input terminal 12. Optional terminal 13. Audio output terminal 14. Audio input terminal For power outlet TIPS • Set the audio input terminal used for each input mode in AUDIO SELECT on the SETUP menu. The factory settings are shown below. Input mode Audio input terminal (Factory setting) DVI-D Audio input terminal DisplayPort DisplayPort input terminal HDMI1 HDMI1 input terminal HDMI2 HDMI2 input terminal D-SUB[RGB], D-SUB[COMPONENT] Audio input terminal OPTION * Expansion slot * When you have used the expansion slot to expand the functions. • The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. • DisplayPort is a registered trademark of Video Electronics Standards Association. • Adobe, Acrobat, and Acrobat Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. • All other brand and product names are trademarks or registered trademarks of their respective holders. E6