Sharp PN-L803CA A Quick Start Setup Guide - Page 8

Connections Caution • Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting cables. Also, read the manual of the equipment to be connected. • Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables connected to the input and output terminals may cause malfunctions and the other problems. 13 14 15 16 17 19 1 18 2 3 4 5 6 78 For power outlet 9 10 11 12 1. AC input terminal 2. Power cord (Supplied) 3. External speaker terminals 4. Audio output terminal 5. DisplayPort output terminal 6. Touch pen adapter port 7. USB 1 port (for touch panel) 8. LAN terminal 9. D-sub 1 input terminal 10. DisplayPort input terminal 11. HDMI 1 input terminal 12. Audio 1 input terminal 13. RS-232C input terminal 14. USB 2 port (for touch panel) 15. D-sub 2 input terminal 16. HDMI 2 input terminal 17. HDMI 3 input terminal 18. Audio 2 input terminal 19. USB cable To use the USB port on the front of the tray (for USB device) (USB 2.0 compliant), connect the USB cable to the USB port on the computer. (The touch panel must be connected separately.) TIPS • Set the audio input terminal to be used in each input mode in AUDIO SELECT on the SETUP menu. The factory settings are shown below. Input mode D-SUB1 D-SUB2 DisplayPort Audio input terminal (Factory setting) Audio1 input terminal Audio2 input terminal DisplayPort input terminal Input mode HDMI1 HDMI2 HDMI3 Audio input terminal (Factory setting) HDMI 1 input terminal HDMI 2 input terminal HDMI 3 input terminal • To use the touch panel, the touch panel and computer must be connected, and Touch pen Management Tool, and Pen Software must be installed on the computer from the supplied CD-ROM. When the Information Display Downloader is installed, you can check and download the most recent versions of the software programs. To install the software, see the manual for each. • The USB port varies depending on the terminal connected to the computer. D-sub 1 input terminal/DisplayPort input terminal/HDMI 1 input terminal USB 1 port D-sub 2 input terminal/HDMI 2 input terminal/HDMI 3 input terminal USB 2 port (Factory setting. Can be changed in TOUCH INPUT SELECT in the SETUP menu.) • Download the setup program for the SHARP Display Connect and Touch Viewer with the Information Display Downloader. • The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. • DisplayPort is a registered trademark of Video Electronics Standards Association. • Adobe, Acrobat, and Acrobat Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. • All other brand and product names are trademarks or registered trademarks of their respective holders. E6