Sharp PG-F255W PG-F255W Setup Manual - Page 31
Click Properties on the File, Close HyperTerminal.
UPC - 074000365759
View all Sharp PG-F255W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Resetting the Lamp Timer of the Projector via LAN 5 Click "Properties" on the "File" menu. 6 Click the "Settings" tab, and then click "ASCII Setup". 7 Select the check boxes next to "Send line ends with line feeds", "Echo typed characters locally", and "Append line feeds to incoming line ends", and click "OK". • The LAMPRESET Properties window appears, click "OK". 8 If a user name and/or password is set for the projector, enter the user name and password. 9 Send the lamp reset command "LPRE0001". • This command can only be sent when the projector is in standby mode. • When "OK" is received, this indicates that the lamp was successfully reset. 10 Close HyperTerminal. -31
-31
Resetting the Lamp Timer of the Projector via LAN
5
Click “Properties” on the “File”
menu.
6
Click the “Settings” tab, and
then click “ASCII Setup”.
7
Select the check boxes next to
“Send line ends with line feeds”,
“Echo typed characters locally”,
and “Append line feeds to in-
coming line ends”, and click
“OK”.
•
The LAMPRESET Properties window
appears, click “OK”.
8
If a user name and/or password
is set for the projector, enter the
user name and password.
9
Send the lamp reset command
“LPRE0001”.
•
This command can only be sent when
the projector is in standby mode.
•
When “OK” is received, this indicates
that the lamp was successfully reset.
10
Close HyperTerminal.