Sharp PG-F212X-L PG-F212X-L Operation Manual - Page 51
Checking the Lamp Life Status, Keylock Function, Locking the Operation, Buttons on the Projector
View all Sharp PG-F212X-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
5 Enter the same keycode in "Reconfirm". Note To cancel the keycode that you have already set • Press R on the projector for four times in steps 4 and 5 above. When the System Lock is set • When System Lock is set, the keycode input screen appears after the power is turned on. When it appears, enter the right keycode to start projection. Input screen for keycode System Lock ---- Keylock Function Locking the Operation Buttons on the Projector Use this function to lock the operation buttons on the projector. a Locking the Operation Buttons Hold down ENTER on the projector for about 5 seconds while the projector is being turned on. On-screen display • The keylock function does not affect the operation with the remote control buttons. • You cannot use the keylock function while the projector is warming up. Checking the Lamp Life Status You can confirm the cumulative lamp usage time and the remaining lamp life (percentage). a Taking the Keylock off Hold down ENTER on the projector for about 5 seconds. On-screen display Lamp usage condition "Life" Operated exclusively with Lamp Setting set to "Eco +Quiet" Operated exclusively with Lamp Setting set to "Bright" Remaining lamp life 100% Approx. 4,000 hours Approx. 2,000 hours 5% Approx. 200 hours Approx. 100 hours Note • It is recommended that the lamp be changed when the remaining lamp life becomes 5%. • The lamp life may vary depending on the usage condition. • When the projector is in standby mode, you can release the keylock by holding down ENTER and STANDBY/ON on the projector simultaneously for about 5 seconds. Info • Keylock cannot be set while the projector is: displaying the "Setup Guide" or "Menu" screens, in standby mode, warming up, changing input signals, operating "Auto Sync" function, in "FREEZE" mode or on the "System Lock" screen during warming up. Useful Features 47