Sharp PG-D2710X PG-D2710X PG-D3010X PG-D3510X Operation Manual - Page 34
Switching the Input Mode, Adjusting the Volume
UPC - 074000365865
View all Sharp PG-D2710X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Image Projection (Continued) Switching the Input Mode Select the appropriate Input mode for the connected equipment. Press INPUT / to display the INPUT list. Use INPUT / to select the Input mode, and use O/Q to select the audio input terminal. INPUT buttons AV MUTE button VOL +/- (Volume) buttons O/Q buttons Adjusting the Volume Press VOL +/- on the remote control or -O/Q+ on the projector to adjust the volume. Note • Pressing VOL-/-O will lower the volume. • Pressing VOL+/Q+ will raise the volume. • When the projector is connected to external equipment, the volume level of the external equipment changes in accordance with the volume level of the projector. Set the projector's volume to the lowest level when turning the projector on/off or when changing the input signal. • When you do not want to output the sound from the projector's speaker while the projector is connected to external equipment, set "Speaker" in the "PRJ-ADJ1" menu to "Off". (See page 50.) On-screen display Displaying the Black Screen and Turning Off the Sound Temporarily Press AV MUTE on the remote control or close the lens shutter to temporarily display a black screen and turn off the sound. Note • Pressing AV MUTE again will turn the projected image back on. • When you close the lens shutter, the projector will be set to AV Mute mode and then the projector will be turned off automatically after about 30 minutes. 30 On-screen display