Sharp OLR-751 IR Touch Overlay Installation Guide for the - Page 3

Installation Procedure

Get Sharp OLR-751 PDF manuals and user guides View all Sharp OLR-751 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

IR Touch Overlay Installation Guide for the OLR-751 NEC Display Solutions of America, Inc. Rev 1.0 6.0 Installation Procedure 6.1 Remove the overlay from the packaging. Place the overlay face down on a padded surface and verify the material contents (see Equipment on Page 2). 6.2 Use a #2 Philips screwdriver to remove the five (5) #6-32 flathead screws securing the bottom bracket to the overlay. 6.2.1 Do NOT remove any remaining screws from the overlay. 6.3 Remove the bottom bracket from the overlay. 6.3.1 Set the screws and bracket aside for reuse in steps 6.9 and 6.10. 6.4 Use a cloth and mild cleaner to clean the monitor and inside surface of the overlay. 6.4.1 Do not use any chemical solvents, such as acidic or alkali solutions. 6.4.2 If available, use compressed air after cleaning to remove any lint or dust. www.necdisplay.com OLR-751 3

  • 1
  • 2
  • 3
  • 4
3
NEC Display Solutions of America, Inc.
www.necdisplay.com
OLR
-
751
IR Touch Overlay
Installation Guide for the OLR
-
751
Rev 1.0
6.0
Installation Procedure
6.1
Remove the overlay from the packaging.
Place the overlay face down on a padded surface and verify
the material contents (see Equipment on Page 2).
6.2
Use a #2 Philips screwdriver to remove the five (5) #6
-
32 flathead screws securing the bottom
bracket to the overlay.
6.2.1
Do NOT remove any remaining screws from the overlay.
6.4
Use a cloth and mild cleaner to clean
the monitor and inside surface of the overlay.
6.4.1
Do not use any chemical solvents, such as acidic or alkali solutions.
6.4.2
If available, use compressed air after cleaning to remove any lint or dust.
6.3
Remove the bottom bracket from the overlay.
6.3.1
Set the screws and bracket aside for reuse in steps 6.9 and 6.10.