Sharp MX-M6070 Start Guide - Page 18
Turning On/off The Power, Motion Sensor
![]() |
View all Sharp MX-M6070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
BEFORE USING THE MACHINE TURNING ON/OFF THE POWER This section describes how to turn on/off the machine's power and how to restart the machine. Operate two power switches: the main power switch inside the front cover, located in the lower left corner, and the [Power] button on the operation panel. Turning on the power • Turn the main power switch to the " " position. • When the main power indicator lights in green, press the [Power] button. Turning off the power • Press the [Power] to turn off the power. To turn off the power for an extended time, press the [Power] button to turn off the power, and switch the main power switch to the " " position after the operation panel screen disappears. [Power] button Main power indicator Restart the machine • Turn off the power by pressing the [Power] button and then press it again to turn on the power. Main power switch • When turning off the main power switch, press the [Power] button on the operation panel and then turn the main power switch to the " " position. In a sudden case of main power outage, turn the power for the machine back on and then turn it off in the correct order. If the machine is left for a long time with the main power having been turned off prior to the [Power] button being turned off, abnormal noises, degraded image quality or other problems may result. • Turn off both the [Power] button and the main power switch and unplug the power cord if you suspect a machine failure, if there is a bad thunderstorm nearby, or when you are moving the machine. • When using the fax or Internet fax function, always keep the main power switch in the " " position. • In order for some settings to take effect, the machine must be restarted. In some states of the machine, restarting with the [Power] button may not make the settings take effect. In this case, turn off the main power switch and then turn it on again. MOTION SENSOR (MX-M3070/M3570/M4070/M5070/M6070 only) This sensor detects the presence of a person that approaches the machine, and automatically wakes the machine from sleep mode (Motion Sensor Mode Only). Three settings are available for the detection range ( / / ). Motion sensor Detection range Approx. maximum 1.5 m Near Far 60 degrees • The motion sensor detects the movement of sources of heat. • The detection range may vary depending on the installation site and environment (ambient temperature, etc.). 18
![](/manual_guide/products/sharp-mxm3050-start-guide-691ba5e/18.png)