Sharp MX-M564N Operating Guide - Page 44

BEFORE USING THE MACHINE BEFORE USING THE MACHINE This section provides basic information about the machine. Please read this chapter before using the machine. PART NAMES AND FUNCTIONS EXTERIOR (1) (2) (3) (4) (5) (6) (7) (8) (9) (1) Automatic document feeder This automatically feeds and scans multiple originals. Both sides of 2-sided originals can be automatically scanned. + PLACING THE ORIGINAL (page 1-41) (2) Keyborad* Use this as a substitute for the soft keyboard displayed on the touch panel. When not being used, it can be stored under the operation panel. + KEYBOARD (page 1-81) (3) Output tray (center tray)* Output is delivered to this tray. (4) Punch module* This is used to punch holes in output. Requires a saddle stitch finisher, saddle stitch finisher (large stacker), or finisher (large stacker). + PUNCH MODULE (page 1-62) * Peripheral device. (5) Saddle stitch finisher (large stacker)* This staples and folds paper. A punch module can also be installed to punch holes in output paper. + SADDLE STITCH FINISHER (LARGE STACKER) (page 1-57) (6) Tray 1 This holds paper. + TRAY SETTINGS FOR TRAY 1 TO 4 (page 1-30) (7) Tray 2 (when a paper drawer is installed)* This holds paper. + TRAY SETTINGS FOR TRAY 1 TO 4 (page 1-30) (8) Tray 3 (when a paper drawer is installed)* This holds paper. + TRAY SETTINGS FOR TRAY 1 TO 4 (page 1-30) (9) Tray 4 (when a paper drawer is installed)* This holds paper. + TRAY SETTINGS FOR TRAY 1 TO 4 (page 1-30) 1-3 Contents