Sharp MX-M283N Safety Guide - Page 38
Problem, Point to check, Solution
View all Sharp MX-M283N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Problem The machine is not detected (when connected to a network). The plug and play screen does not appear (USB connection in Windows). WHEN INSTALLATION WAS NOT SUCCESSFUL Point to check Is the machine power on? Is your computer connected correctly to the machine? Is the machine power on? Can your computer use a USB connection? Solution If the machine is powered off, it will not be detected. Switch on the main power switch and the [POWER] key ( ) in that order. (In Windows, search again after powering on the machine.) Make sure that the cable is connected securely to the LAN connectors on your computer and the machine. Check the connections at the hub as well. ☞ CONNECTING TO A NETWORK (page 7) When a USB cable is connected, make sure the power of the machine is "ON" and then connect a USB cable to the machine. When the machine is not powered on, switch on the main power switch and the [POWER] key ( ) in that order. Check your computer whether or not a USB interface can be used on the Device Manager in your computer. (For information on "Device Manager", see Help in Windows.) If USB can be used, your controller chipset type and root hub will appear in "Universal Serial Bus controllers" in "Device Manager". (The items that appear will vary depending on your computer.) If these two items appear, USB should be useable. If a yellow exclamation point appears next to "Universal Serial Bus controllers" or the two items do not appear, refer to your computer manual or check with the manufacturer of your computer to enable USB and then reinstall the printer driver. 41