Sharp MX-C300P Operation Guide - Page 7
Before Using The Machine, Part Names And Functions
View all Sharp MX-C300P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1 BEFORE USING THE MACHINE This chapter contains basic information that should be read before using the machine. PART NAMES AND FUNCTIONS (14) (15) (7) (1) (8) (2) (10) (3) (9) (11) (12) (16) (4) (3) (3) (13) (5) (6) (1) Power switch Press to turn the machine power on and off. (2) Output tray extension When you eject the paper of 8-1/2" x 11" size or larger, you can open to the outside. (3) Handles Use to move the machine. When attaching tray 2, use the handle at the bottom. Note The main unit is extremely heavy, and thus two people are required to do the work. When lifting the main unit, grasp the handles on each side firm. (4) Output tray Printed pages are output to this tray. (5) Tray 1 Tray 1 can hold approximately 250 sheets of paper (21 lbs. (80 g/m2)). For restrictions on paper types, sizes, and weights, refer to "USEABLE PAPER" (p.13). (6) Tray 2 (Option) Tray 2 can hold approximately 500 sheets of paper (21 lbs. (80 g/m2)). For restrictions on paper types, sizes, and weights, refer to "USEABLE PAPER" (p.13). (7) Operation panel Contains operation keys and indicator lights. (8) USB 2.0 port (Type A) This is used to connect a USB device such as USB flash memory to the machine. (9) Front cover Open to replace the toner cartridge etc. (10) Side cover handle Pull to open the side cover. (11) Side cover Open to remove misfed paper. (12) Bypass tray guides Adjust to the width of the paper when using the bypass tray. (13) Bypass tray Special paper (heavy paper or transparency film) can be fed from the bypass tray. (14) USB 2.0 port (Type B) Connect the USB cable to this connector when the machine is used on a USB connection. (15) LAN connector Connect the LAN cable to this connector when the machine is used on a network. (16) Bypass tray extension Open this tray when loading paper in the bypass tray. 7