Sharp MX-4500N MX-2300N MX-2700N MX-3500N MX-3501N MX-4500N MX-4501N - Page 628
Selecting single color copying, System Settings Administrator: Detect Standard in Auto Color Mode
View all Sharp MX-4500N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 628 highlights
Press the [COLOR START] key ( ). Scanning begins. • If the originals were placed in the document feeder tray, the originals are copied. 4 • If you are using the document glass, copy each page one page at a time. To cancel scanning of the original and copying... Press the [STOP] key ( ). Even if a color mode is selected, copying will take place in black and white if the [BLACK & WHITE START] key ( ) is pressed. System Settings (Administrator): Detect Standard in Auto Color Mode When the color mode is set to auto, the discrimination point for detecting whether originals are color or black and white can be set to one of 5 levels. Selecting single color copying When [Single Color] is selected for the color mode, the following screen appears. Touch the desired color and touch the [OK] key. Color Mode OK Single Color OK R(Red) C(Cyan) G(Green) M(Magenta) B(Blue) Y(Yellow) Selecting 2 color copying When [2 Color] is selected for the color mode, the following screen appears. Touch the desired colors and touch the [OK] key. Color Mode 2 Color Select a color other than black. R(Red) G(Green) C(Cyan) M(Magenta) OK OK B(Blue) Y(Yellow) 22