Sharp MX-4051 User Manual - Color Advanced & Essential Series 2 - Page 808
Network Name Setting, Interface Settings
![]() |
View all Sharp MX-4051 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 808 highlights
SETTING MODE►SYSTEM SETTINGS Network Name Setting Device Name Enter a device name. Domain Name Enter the domain name. Comment Enter a comment. Interface Settings Select the general network settings. The TCP/IP information can be set. Connection Type Switch between [Wired Only], [Wired+Wireless (Access Point Mode)], or [Wireless (Infrastructure Mode)] to suit the network connection status. Keep Wireless Access Point activated This can only be enabled if the "Connection Type" is [Wired+Wireless (Access Point Mode)]. If enabled, the machine can normally use a wireless LAN network. If disabled, the NFC card reader must be touched to the mobile device or the [Easy Connect (QR code)] key must be tapped in the home screen to enable wireless LAN. When one of the conditions below occurs, the wireless LAN connection is automatically canceled. • When auto clear or auto power shut-off is performed on the machine. • When there is no connection to the access point for a certain period of time. IPv4 Settings When using the machine on a TCP/IP (IPv4) network, use this setting to configure the IP address of the machine. DHCP Use this setting to have the IP address obtained automatically using DHCP (Dynamic Host Configuration Protocol) v6. When this setting is enabled, it is not necessary to manually enter an IP address. If DHCP/BOOTP is used, the IP address assigned to the machine may change automatically. If the IP address changes, printing will not be possible. IPv4 Address Enter the IP address of the machine. Subnet Mask Enter the IP subnet mask. Default Gateway Enter the default gateway address. IPv6 Settings When using the machine on a TCP/IP (IPv6) network, use this setting to configure the IP address of the machine. IPv6 Enable this setting. 7-92
![](/manual_guide/products/sharp-mx2651-user-manual-color-advanced-essential-series-2-02842b3/808.png)