Sharp MX-3115N Operating Guide - Page 123

COPIER MAKING A COPY USING THE DOCUMENT GLASS To make a copy of a book or other thick original that cannot be scanned with the automatic document feeder, open the automatic document feeder and place the original on the document glass. This section explains how to make a copy (1-sided copy of a 1-sided original) using the document glass. Original size detector Open the automatic document feeder, place the original face down on the document glass, and then gently close the automatic document feeder. Document glass scale mark Document glass scale mark A5 (5-1/2" x 8-1/2") B5R A4R (8-1/2" x 11"R) 1 B5 A4 (8-1/2" x 11") B4 (8-1/2" x 14") A3 (11" x 17") • Align the corner of the original with the tip of the arrow mark on the document glass scale. • Place the original in the appropriate position for its size as shown above. • After placing the original, be sure to close the automatic document feeder. If left open, parts outside of the original will be copied black, causing excessive use of toner. Do not place any objects under the original size detector. Closing the automatic document feeder with an object underneath may damage the original size detector plate and prevent correct detection of the document size. Colour Mode Special Modes Check the paper to be used and the Full Colour Plain 2-Sided Copy colour mode. A4 Output Make sure that the desired paper (tray) and colour mode are Exposure 1. A4 selected. Auto 2. A4R 3. B4 4. A3 File • To change the paper (tray), touch the [Paper Select] key. 2 Copy Ratio Original Paper Select Quick File ☞ PAPER TRAYS (page 2-11) • To change the colour mode, touch the [Colour Mode] key. 100% Auto Auto ☞ COPY COLOUR MODES (page 2-21) A4 A4 Plain Preview Depending on the size of the placed original, there may be cases where the same size of paper as the original is not selected automatically. In this event, change the paper size manually. 2-14 Contents