Sharp MX-3050V Color Advanced and Essentials Troubleshooting Guide - Page 5

General Problems Placing the original and adding paper Is the original placed correctly? ●Automatic Document Feeder If the original has a fold, straighten the fold before Do not exceed the placing. (This prevents original misfeeds and incorrect indicator line Align the edges and place detection of the original size) face up Insert all the way in Adjust to the original size If the original is stapled, be sure to remove the staples and fan the pages well before placing. (This is to prevent misfeeding and tearing of the original, and to prevent torn fragments of the original from remaining in the feeder.) ●Document glass Place the original in the back left corner. If the original has a fold, straighten the fold before placing. (This prevents original misfeeds and incorrect detection of the original size) Mark Platen Scale Original size detector Is the paper loaded correctly? ●Paper tray Fan the paper well before loading it. Set the guides to the size of the paper. ●Bypass tray Pull the extension guide all the way out. (A4R (8-1/2 x 11"R) or more) Load the paper with the print side facing down. The paper must not exceed the maximum number of sheets and must not be higher than the indicator line. Adjust the bypass tray guides so that they slightly contact the loaded paper. The paper must not exceed the maximum number of sheets and must not be higher than the indicator line. 5