Sharp M981 User Manual - NEC - English - Page 105

Protect

Page 105 highlights

PROTECT PROTECT MENU POWER SAVE SETTINGS POWER SAVE TIME SETTING POWER SAVE MESSAGE QUICK START THERMAL MANAGEMENT FAN CONTROL FAN SPEED DISPLAY FAN STATUS INTERNAL TEMPERATURE SLOT FAN STATUS INTERNAL TEMPERATURE SYSTEM FAN REQUIREMENT OPTION COMPUTE MODULE Enables or disables the monitor entering power saving mode. When [ENABLE] is selected, the monitor goes into power saving mode after the period of time has passed with no input signal detected or signal loss has occurred. When the monitor is in power saving mode, the LED power indicator will change color. Refer to the Power indicator table (see page 78). When [DISABLE] is selected, the monitor doesn't go into power saving mode. Please refer to the monitor's specifications (see "M981" on page 81) for power consumption information. N OTE: • When the monitor is connected to a computer, the computer's display adapter may not stop sending digital data even though there is no image on-screen. If this occurs the monitor will not switch into standby mode. • If [AUTO OFF] or [CUSTOM] is selected in [HUMAN SENSING]*1, the power save function does not work.  *1: This function is available only when connecting the optional sensor unit. Sets the amount of time the monitor should wait for input signal before going into power save mode. Shows a message as the monitor is entering low power mode. When [ENABLE] is selected, the monitor will quickly return to the [ON] state when a signal is detected. Enabling this option increases standby power consumption. Sets the cooling fan behavior. [AUTO] to protect the internal components, the fan turns on when the monitor's internal temperature exceeds operating parameters. The fans will automatically turn off when the monitor's internal temperature is within its normal operating specifications. [ON] the monitor's fan is always on. N OTE: The fan cannot be manually controlled. It is always on when [ON] is selected in the OSD menu or when [AUTO] is selected and the monitor's internal temperature exceeds its specified operating temperatures. The [FAN SPEED] can be adjusted between LOW and HIGH. Shows the status of the monitor's internal fan. Shows the status of the internal temperature of the monitor. Shows the internal temperature of the Option Board. Shows the status of the fan for the Option Board. Shows the status of the internal temperature of the Option Board. Show the requirement operation from the Option Board. English−101

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113

English−101
PROTECT
PROTECT MENU
POWER SAVE SETTINGS
POWER SAVE
Enables or disables the monitor entering power saving mode. When [ENABLE] is selected, the monitor
goes into power saving mode after the period of time has passed with no input signal detected or signal
loss has occurred. When the monitor is in power saving mode, the LED power indicator will change color.
Refer to the Power indicator table (see
page 78
). When [DISABLE] is selected, the monitor doesn’t go
into power saving mode.
Please refer to the monitor’s specifications (see
“M981” on page 81
) for power consumption information.
NOTE: •
When the monitor is connected to a computer, the computer’s display adapter may not stop
sending digital data even though there is no image on-screen. If this occurs the monitor will
not switch into standby mode.
If [AUTO OFF] or [CUSTOM] is selected in [HUMAN SENSING]*
1
, the power save function
does not work.
*
1
: This function is available only when connecting the optional sensor unit.
TIME SETTING
Sets the amount of time the monitor should wait for input signal before going into power save mode.
POWER SAVE MESSAGE
Shows a message as the monitor is entering low power mode.
QUICK START
When [ENABLE] is selected, the monitor will quickly return to the [ON] state when a signal is detected.
Enabling this option increases standby power consumption.
THERMAL MANAGEMENT
FAN CONTROL
Sets the cooling fan behavior.
[AUTO] to protect the internal components, the fan turns on when the monitor’s internal temperature
exceeds operating parameters. The fans will automatically turn off when the monitor’s internal temperature
is within its normal operating specifications.
[ON] the monitor’s fan is always on.
NOTE:
The fan cannot be manually controlled. It is always on when [ON] is selected in the OSD menu or
when [AUTO] is selected and the monitor’s internal temperature exceeds its specified operating
temperatures.
FAN SPEED
The [FAN SPEED] can be adjusted between LOW and HIGH.
DISPLAY
FAN STATUS
Shows the status of the monitor’s internal fan.
INTERNAL
TEMPERATURE
Shows the status of the internal temperature of the monitor.
SLOT
Shows the internal temperature of the Option Board.
FAN STATUS
Shows the status of the fan for the Option Board.
INTERNAL
TEMPERATURE
Shows the status of the internal temperature of the Option Board.
SYSTEM FAN
REQUIREMENT
Show the requirement operation from the Option Board.
OPTION
COMPUTE MODULE