Sharp LED-FE3 Safety Manual - Series - Page 5
Caution
![]() |
View all Sharp LED-FE3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
CAUTION When connecting the power cord to the product's AC IN terminal, make sure the connector is fully and firmly inserted. Do not damage the power cord. Do not put heavy objects on it, place it near heaters, pull it with excessive strength, or apply a strong force on it while it is bent. A damaged power cord may cause a fire or an electrical shock. Do not install the product in narrow places where heat tends to build up. Do not use the product in an environment with low heat dissipation. Otherwise, it may cause a malfunction. The RJ-45 port of the product is for use with the product only. Do not connect it to a network. Connecting this port to a network that may receive over-voltage current may cause damage to the product or an electrical shock. Do not use the product in a vehicle or another means of transportation. Do not place the product under direct sunlight or near heaters. This product is designed to be used indoors. Do not use it outdoors. Otherwise, it may cause a malfunction. Do not use or store the product in the following places. • Near heaters • Places with lots of humidity or dust, or places subject to oily smoke • Places where water or oil may splash • Places with lots of corrosive gases, such as near hot springs • Places where the product may freeze • Do not place the product on its side, face down, or upside down. • Places with lots of vibrations If you will not be using the product for a long time, disconnect it from the power distributor for safety purposes. Disconnect the power supply when performing the maintenance. Install the product in accordance with the local laws and regulations. Use ESD gloves when handling Pixel cards to prevent static electricity from the human body and contamination due to finger oils, perspiration salts, flaking skin, and/or other forms of human excretory secretions. The LED modules and their electrical components are sensitive to biological agents and exposure to such risks degradation of materials and performance. Eliminate any static electricity from your body before touching the Pixel cards by touching an aluminum sash, a door knob, or some other metal object. This product can only be serviced in the country where it was purchased. 3
![](/manual_guide/products/sharp-ledfe3-safety-manual-series-a3197e1/5.png)