Sharp LC-22LS510UT LC-19LS40UT LC-22LS510UT LC-32LS510UT Operation Manual - Page 30

On-Screen Display Menu AV Mode Adjust the best picture appearance from selecting the preset value of Standard, Movie, Power Saver, User, or Sports. Color Temperature For a better white balance, use color temperature correction. Warm: Normal: White with reddish tone Cool: White with bluish tone •• User: White balance can be adjusted manually through the R/G/B Gain between a maximum of +100 and a minimum of -100 for each color temperature. Advanced Video Provide various advanced functions for optimizing the picture quality. DNR DNR (Digital Noise Reduction) enables you to "soften" the screen representation of a weak signal to reduce the noise effect. Select effect degrees from Low, Medium, Strong, Auto, or Off. The default setting is Medium. MPEG NR If the receiving signal of MPEG has a grained noise depending on the compression and conversion, the noise may be reduced when using this function. Adaptive Luma Control Automatically adjusts the brightness and contrast after analyzing the input signal. This function enriches the colors and the depth of the picture. Flesh Tone You can adjust the skin color to be more natural. DI Film Mode Automatically detects a film-based source (originally encoded at 24 frames/seconds), analyzes it then recreates each still film frame for high-definition picture quality. Blue Stretch When Blue Stretch is selected, the brightest part of the screen will be leveled down to reduce the saturation. Game Mode The Game Mode enhances the gaming experience by reducing game controller delay. HDMI Mode HDMI Mode only shows and is available when HDMI device is connected. Select from Auto, Graphic, or Video. •• Auto: The HDMI input timing is set to Video mode or Graphic mode automatically •• Graphic: HDMI input timing set to Graphic mode (PC). The image is full scan •• Video: HDMI input timing set to Video mode. The image is over scan. •• HDMI Mode is only workable for HDMI Video & Progressive timing as followed: 1920x1080p,1280x720p,720x480p, 720x576p. Adaptive Backlight When Adaptive Backlight is activated, it will automatically optimize the backlighting levels for dark scenes. VGA The VGA adjustment is only available when the input source is PC and your TV is receiving a computer signal. Select Auto Adjust for adjusting the settings automatically, or select H. Position, V. Position, Phase or Clock and use c or d to adjust your preference. 29