Sharp C860Q NEC MultiSync C750Q and C860Q User Manual - English - Page 33

HDMI-CEC Command Please connect a HDMI-CEC compatible device to HDMI port. OSD menu HDMI-CEC command name Explanation Setting CEC (Consumer Electronics Control) One Touch Play Remote Control Pass Through When a HDMI-CEC compatible device is turned on, the monitor connected to the device by an HDMI cable also automatically turns on. After the monitor powers on, the input terminal switches automatically to the target HDMI. If the monitor is turned on when HDMI-CEC compatible devices are turned on, it changes the [INPUT] from the current one to [HDMI2]. The monitor's wireless remote control button operation can function with HDMI-CEC compatible devices. INPUT-ADVANCED: INPUT SIGNAL SETTINGS DisplayPort HDMI Media Player OVERSCAN VIDEO RANGE CEC SIGNAL FORMAT SIDE BORDER COLOR RESET CEC AUTO TURN OFF YES / AUDIO RECEIVER ENABLE / SEARCH DEVICE YES / OFF NO DISABLE NO To set the CEC options, please follow the steps below. Power Status System Information For example, if turning on the monitor by wireless remote control and pressing the play button, a HDMI-CEC compatible device can also be turned on and play. Connected HDMI-CEC compatible devices obtain the monitor's power status, such as if the monitor is in standby mode or on. This function obtains the information for a connected HDMI-CEC compatible device (CEC version, Physical Address). In addition, this function copes with the "Change Language function". Press the Menu button to open the OSD. Using the  + - buttons, navigate to [INPUT], to [ADVANCED], to [CEC], then press SET/ POINT ZOOM button to enter the CEC options. Use the + - buttons to highlight [MODE1] or [MODE2], then press SET/POINT ZOOM button to enable CEC. If the language for the monitor is changed, the language for a connected HDMI-CEC compatible device is changed to the same language, which is selected for the monitor. For the "Change Language function", it is necessary that the connected HDMI-CEC compatible device be able to cope with multilanguage. AUTO TURN OFF System Standby If the monitor is set to standby using the wireless Use the  buttons to select [AUTO TURN remote control, HDMI-CEC compatible devices OFF]. also go into standby at the same time. If the monitor goes into standby while an HDMICEC compatible device is recording, the device remains on. Please refer to the user's manual supplied with the HDMI-CEC compatible device for further information. Use the + - buttons to highlight [YES], then press the SET/POINT ZOOM button to select [YES]. AUDIO RECEIVER System Audio Control Please connect an audio equipment with ARC function to HDMI1 (ARC) by the included ARC supported HDMI cable. Use the  buttons to select [AUDIO RECEIVER] then press SET/POINT ZOOM. The Volume button on the wireless remote control can control the volume of the connected HDMI ARC audio equipment. While this function is active, the monitor's internal speaker is automatically set to MUTE. Use the + - buttons to highlight [ENABLE], then press the SET/POINT ZOOM button to select [ENABLE]. SEARCH DEVICE Device OSD Name Transfer Use the + - buttons to highlight YES, then press the SET/POINT ZOOM button to start the search. Use the  buttons to select [SEARCH DEVICE]. Routing Control By selecting a device name, the HDMI-CEC compatible device input switches to the input you selected. After selecting the device, wireless remote control operation functions for the selected device. This function searches for CEC compatible devices on the monitor's HDMI connections. If a HDMI-CEC compatible device is successfully detected, this function obtains the device's name. The device's name and the HDMI connection it is found on are displayed. This CEC function supports Feature Abort. Please refer to Connections (see page 25) for HDMI-CEC compatible device connection. English−29