Sennheiser RS 165 RS165 EN (8.6 MB) - Page 29
Leaving the range of the transmitter, Clearing the pair settings on the headphones
View all Sennheiser RS 165 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Troubleshooting BASS Leaving the range of the transmitter The range of the transmitter largely depends on environmental conditions such as wall thickness, wall composition etc. If the headphones leave the range of the transmitter, the audio first cuts out occasionally until it finally cuts out completely. If you re-enter the transmission range within 5 minutes, the connection is automatically re-established. If you spend more than 5 minutes outside the transmission range, the headphones switch off automatically. Clearing the pair settings on the headphones 1 Press the Volume +/- buttons simultaneously and hold for 2 seconds. The HDR status LED blinks red rapidly. 2 Press the HDR power button while continuously holding the Volume +/- buttons. Release all 3 buttons. The HDR status LED lights up green or red, depending on the battery condition, and starts blinking slowly. The pair settings on the headphones are cleared. 1 2 BASS BASS 2s RS 165 | 27