Sennheiser EW-DX EM 2 Dante Instruction manual and frequently asked questions - Page 146
System -> TX Update menu item
![]() |
View all Sennheiser EW-DX EM 2 Dante manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
EW-DX EM 2 rack receiver System -> TX Update menu item This menu item lets you perform a firmware update for the transmitters. This update is recommended after you perform a firmware update for the receiver (see "Updating the firmware of the receiver"). The firmware versions currently installed on the connected transmitter can be viewed under the TX Software menu item for the respective channel (see "Ch 1 / Ch 2 -> TX Software menu item"). To open the TX Update menu item: ▷ In the System menu, navigate to the TX Update menu item. ▷ Press the jog dial to open the menu. The available sender firmware is displayed: ▷ Press the jog dial to start the firmware update. ▷ Press the SYNC button on the connected transmitter for 3 seconds. You have about 20 seconds to do this. The progress bar 145
![](/manual_guide/products/sennheiser-ewdx-em-2-instruction-manual-frequently-asked-questions-evolution-wireless-digital-ewd-ewdx-ewdp-pdf-f2d69e4/146.png)