Sennheiser EW-DX EM 2 Dante Instruction manual and frequently asked questions
Sennheiser EW-DX EM 2 Dante Manual
View all Sennheiser EW-DX EM 2 Dante manuals
Add to My Manuals
Save this manual to your list of manuals |
Sennheiser EW-DX EM 2 Dante manual content summary:
- Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 1
. Alternatively, the HTML instructions are also available in the download area of the product page: www.sennheiser.com/ew-d www.sennheiser.com/ew-dx www.sennheiser.com/ew-dp Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com EW-D | EW-DX | EW-DP - v3.0 (04 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 2
PRODUCT INFORMATION „Products of the EW-D series" „Sets available for the EW-D series" „Products of the EW-DX series" „Sets available for the EW-DX series" „Products of the EW-DP series" „Sets available for the EW-DP series" „Accessories" „Frequency ranges" 1 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 3
series For information about the available accessories, see „Accessories". For information about the available sets, see „Sets available for the EW-D series". For information about the frequency ranges, see „Frequency ranges". You can find technical specifications for the series and the individual - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 4
-D EM (Q1-6) | 470.2 - 526 MHz | Art. no. 508800 EW-D EM (R1-6) | 520 - 576 MHz | Art. no. 508801 EW-D EM (R4-9) | 552 - 607.8 MHz | Art. no. 508802 EW-D EM (S1-7) | 606.2 - 662 MHz | Art. no. 508803 EW-D EM (S4-7) | 630 - 662 MHz | Art. no. 508804 EW-D EM (S7-10) | 662 - 693.8 MHz | Art. no. 508805 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 5
-S (Q1-6) | 470.2 - 526 MHz | Art. no. 508790 EW-D SKM-S (R1-6) | 520 - 576 MHz | Art. no. 508791 EW-D SKM-S (R4-9) | 552 - 607.8 MHz | Art. no. 508792 EW-D SKM-S (S1-7) | 606.2 - 662 MHz | Art. no. 508793 EW-D SKM-S (S4-7) | 630 - 662 MHz | Art. no. 508794 EW-D SKM-S (S7-10) | 662 - 693.8 MHz | Art - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 6
-D SK (Q1-6) | 470.2 - 526 MHz | Art. no. 508780 EW-D SK (R1-6) | 520 - 576 MHz | Art. no. 508781 EW-D SK (R4-9) | 552 - 607.8 MHz | Art. no. 508782 EW-D SK (S1-7) | 606.2 - 662 MHz | Art. no. 508783 EW-D SK (S4-7) | 630 - 662 MHz | Art. no. 508784 EW-D SK (S7-10) | 662 - 693.8 MHz | Art. no. 508785 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 7
Lavalier Set ► The set consists of the following components: • EW-D EM rack receiver • EW-D SK bodypack transmitter • ME 2 lavalier microphone The set is available in the following versions: EW-D ME2 SET (Q1-6) | 470.2 - 526 MHz | Art. no. 508700 EW-D ME2 SET (R1-6) | 520 - 576 MHz | Art. no. 508701 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 8
| Headmic Set ► The set consists of the following components: • EW-D EM rack receiver • EW-D SK bodypack transmitter • ME 3 headset microphone The set is available in the following versions: EW-D ME3 SET (Q1-6) | 470.2 - 526 MHz | Art. no. 508710 EW-D ME3 SET (R1-6) | 520 - 576 MHz | Art. no. 508711 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 9
Lavalier Set ► The set consists of the following components: • EW-D EM rack receiver • EW-D SK bodypack transmitter • ME 4 lavalier microphone The set is available in the following versions: EW-D ME4 SET (Q1-6) | 470.2 - 526 MHz | Art. no. 508720 EW-D ME4 SET (R1-6) | 520 - 576 MHz | Art. no. 508721 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 10
Instrument Set ► The set consists of the following components: • EW-D EM rack receiver • EW-D SK bodypack transmitter • CI 1 instrument cable The set is available in the following versions: EW-D CI1 SET (Q1-6) | 470.2 - 526 MHz | Art. no. 508730 EW-D CI1 SET (R1-6) | 520 - 576 MHz | Art. no. 508731 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 11
bodypack transmitter The set is available in the following versions: EW-D SK BASE SET (Q1-6) | 470.2 - 526 MHz | Art. no. 508740 EW-D SK BASE SET (R1-6) | 520 - 576 MHz | Art. no. 508741 EW-D SK BASE SET (R4-9) | 552 - 607.8 MHz | Art. no. 508742 EW-D SK BASE SET (S1-7) | 606.2 - 662 MHz | Art. no - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 12
835 microphone module The set is available in the following versions: EW-D 835-S SET (Q1-6) | 470.2 - 526 MHz | Art. no. 508750 EW-D 835-S SET (R1-6) | 520 - 576 MHz | Art. no. 508751 EW-D 835-S SET (R4-9) | 552 - 607.8 MHz | Art. no. 508752 EW-D 835-S SET (S1-7) | 606.2 - 662 MHz | Art. no. 508753 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 13
-S BASE SET | Base Set ► The set consists of the following components: • EW-D EM rack receiver • EW-D SKM-S handheld transmitter The set is available in the following versions: EW-D SKM-S BASE SET (Q1-6) | 470.2 - 526 MHz | Art. no. 508760 EW-D SKM-S BASE SET (R1-6) | 520 - 576 MHz | Art. no. 508761 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 14
ME2/835-S SET (Q1-6) | 470.2 - 526 MHz | Art. no. 508770 EW-D ME2/835-S SET (R1-6) | 520 - 576 MHz | Art. no. 508771 EW-D ME2/835-S SET (R4-9) | 552 - 607.8 MHz | Art. no. 508772 EW-D ME2/835-S SET (S1-7) | 606.2 - 662 MHz | Art. no. 508773 EW-D ME2/835-S SET (S4-7) | 630 - 662 MHz | Art. no. 508774 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 15
series For information about the available accessories, see „Accessories". For information about the available sets, see „Sets available for the EW-DX series". For information about the frequency ranges, see „Frequency ranges". You can find technical specifications for the series and the individual - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 16
EM 2 (S1-10) | 606.2 - 693.8 MHz | Art. no. 509344 EW-DX EM 2 (S2-10) | 614.2 - 693.8 MHz | Art. no. 509347 EW-DX EM 2 (S4-10) | 630 - 693.8 MHz | Art. no. 509348 EW-DX EM 2 (U1/5) | 823.2 - 831.8 MHz & 863.2 - 864.8 MHz | Art. no. 509349 EW-DX EM 2 (V3-4) | 925.2 - 937.3 MHz | Art. no. 509351 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 17
handheld transmitter without mute switch is available in the following versions: EW-DX SKM (Q1-9) | 470.2 - 550 MHz | Art. no. 509426 EW-DX SKM (R1-9) | 520 - 607.8 MHz | Art. no. 509427 EW-DX SKM (S1-10) | 606.2 - 693.8 MHz | Art. no. 509428 EW-DX SKM (S2-10) | 614.2 - 693.8 MHz | Art. no. 509431 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 18
. no. 509423 You can find more detailed information about the EW-DX SKM and EW-DX SKM-S in the following sections: ▷ Startup and operation: „EW-DX SKM | EW-DX SKM-S handheld transmitter" ▷ Specifications: „EW-DX SKM | EW-DX SKM-S handheld transmitter" ▷ Compatible microphone modules: „Replacing the - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 19
Products of the EW-DX series EW-DX SK | EW-DX SK 3-PIN bodypack transmitter ► The EW-DX SK bodypack transmitter is available in the following versions: EW-DX SK (Q1-9) | 470.2 - 550 MHz | Art. no. 509384 EW-DX SK (R1-9) | 520 - 607.8 MHz | Art. no. 509385 EW-DX SK (S1-10) | 606.2 - 693.8 MHz | Art. - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 20
| Art. no. 509411 You can find more detailed information about the EW-DX SK and EW-DX SK 3-PIN in the following sections: ▷ Startup and operation: „EW-DX SK | EW-DX SK 3-PIN bodypack transmitter" ▷ Specifications: „EW-DX SK | EW-DX SK 3-PIN bodypack transmitter" ▷ Compatible microphones: „Connecting - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 21
-S SET (V5-7) | 941.7 - 951.8 MHz & 953.05 - 956.05 MHz & 956.65 - 959.65 MHz | Art. no. 509310 EW-DX 835-S SET (Y1-3) | 1785.2 - 1799.8 MHz | Art. no. 509313 You can find more detailed information about the set in the following sections: ▷ Startup and - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 22
2 SET (V5-7) | 941.7 - 951.8 MHz & 953.05 - 956.05 MHz & 956.65 - 959.65 MHz | Art. no. 509324 EW-DX MKE 2 SET (Y1-3) | 1785.2 - 1799.8 MHz | Art. no. 509327 You can find more detailed information about the set in the following sections: ▷ Startup and - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 23
-DX MKE 2-835-S SET | Combo Set ► The set consists of the following components: • EW-DX EM 2 rack receiver • 1x EW-DX SK bodypack transmitters • 1x MKE 2 lavalier microphones • 1x EW-DX SKM-S handheld transmitters • 1x MMD 835 microphone modules • 2x BA 70 rechargeable batteries The set is available - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 24
Sets available for the EW-DX series You can find more detailed information about the set in the following sections: ▷ Startup and operation: „Starting up and operating devices of the Evolution Wireless Digital series" ▷ Specifications: „SPECIFICATIONS" 23 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 25
SK-SKM-S BASE SET (V5-7) | 941.7 - 951.8 MHz & 953.05 - 956.05 MHz & 956.65 - 959.65 MHz | Art. no. 509472 EW-DX SK-SKM-S BASE SET (Y1-3) | 1785.2 - 1799.8 MHz | Art. no. 509475 You can find more detailed information about the set in the following sections: ▷ - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 26
series For information about the available accessories, see „Accessories". For information about the available sets, see „Sets available for the EW-DP series". For information about the frequency ranges, see „Frequency ranges". You can find technical specifications for the series and the individual - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 27
Products of the EW-DP series EW-DP EK portable receiver ► The EW-DP EK rack receiver is available in the following versions: EW-DP EK (Q1-6) | 470.2 - 526 MHz | Art. no. 700050 EW-DP EK (R1-6) | 520 - 576 MHz | Art. no. 700051 EW-DP EK (R4-9) | 552 - 607.8 MHz | Art. no. 700052 EW-DP EK (S1-7) | 606 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 28
2 lavalier microphone The set is available in the following versions: EW-DP ME-2 SET (Q1-6) | 470.2 - 526 MHz | Art. no. 700010 EW-DP ME-2 SET (R1-6) | 520 - 576 MHz | Art. no. 700011 EW-DP ME-2 SET (R4-9) | 552 - 607.8 MHz | Art. no. 700012 EW-DP ME-2 SET (S1-7) | 606.2 - 662 MHz | Art. no. 700013 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 29
4 lavalier microphone The set is available in the following versions: EW-DP ME-4 SET (Q1-6) | 470.2 - 526 MHz | Art. no. 700020 EW-DP ME-4 SET (R1-6) | 520 - 576 MHz | Art. no. 700021 EW-DP ME-4 SET (R4-9) | 552 - 607.8 MHz | Art. no. 700022 EW-DP ME-4 SET (S1-7) | 606.2 - 662 MHz | Art. no. 700023 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 30
microphone module The set is available in the following versions: EW-DP 835 SET (Q1-6) | 470.2 - 526 MHz | Art. no. 700030 EW-DP 835 SET (R1-6) | 520 - 576 MHz | Art. no. 700031 EW-DP 835 SET (R4-9) | 552 - 607.8 MHz | Art. no. 700032 EW-DP 835 SET (S1-7) | 606.2 - 662 MHz | Art. no. 700033 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 31
Assist app You can operate your products easily and intuitively using the EW-D Smart Assist app for iOS and Android. You can make all device settings in the app, as well multi-channel systems with automatic fre- quency setup ▷ Assign names and color labels to wireless links ▷ Get tips and support 30 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 32
Accessories BA 70 rechargeable battery and L 70 USB charger ► BA 70 | Rechargeable battery | Art. no. 508860 L 70 USB | Charger | Art. no. 508861 EW-D CHARGING SET | L 70 USB charger with two BA 70 rechargeable batteries | Art. no. 508862 Startup and operation: „Charging the BA 70 rechargeable - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 33
+ PSU KIT | CHG 70N charger with NT 12-35 CS power supply unit | Art. no. 509456 Startup and operation: „Charging the EW-DX SKM(-S) handheld transmitter, the EW-DX SK (3-PIN) bodypack transmitter or the BA 70 rechargeable battery in the CHG 70N charger" Specifications: „BA 70 rechargeable battery - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 34
| 470 - 694 MHz | Art. no. 508879 EW-D ASA CN/ANZ (Q-R-S) | 470 - 694 MHz | Art. no. 508998 EW-D ASA (T-U-V-W) | 694 - 1075 MHz | Art. no. 508880 EW-D ASA (X-Y) | 1350 - 1805 MHz | Art. no. 508881 Startup and operation: „EW-D ASA antenna splitter" Specifications: „EW-D ASA antenna splitter" 33 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 35
(Q) | 470 - 550 MHz | Art. no. 508873 EW-D AB (R) | 520 - 608 MHz | Art. no. 508874 EW-D AB (S) | 606 - 694 MHz | Art. no. 508875 EW-D AB (U) | 823 - 865 MHz | Art. no. 508876 EW-D AB (V) | 902 - 960 MHz | Art. no. 508877 EW-D AB (Y) | 1785 - 1805 MHz | Art. no. 508878 Use: „Information on antenna - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 36
Antennas Rod antennas ► Accessories Product versions: Half Wave Dipole (Q) | 470 - 550 MHz | Art. no. 508868 Half Wave Dipole (R) | 520 - 608 MHz | Art. no. 508869 Half Wave Dipole (S) | 606 - 694 MHz | Art. no. 508870 Half Wave Dipole (U) | 823 - 865 MHz | Art. no. 508871 Half Wave Dipole (V) | - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 37
AD 1800 passive directional antenna ► Accessories AD 1800 | 1400 - 2400 MHz | Art. no. 504916 Accessories for rack mounting GA 3 rack mount kit 19" rack adapter for mounting the EW-D EM, EW-DX EM 2 or EW-D ASA in a 19" rack. Art. no. 503167 ► 36 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 38
Accessories AM 2 antenna front mount kit Antenna front mount kit for installing antenna connections on the front of the rack when using the EW-D EM, EW-DX EM 2 or EW-D ASA together with the GA 3 rack mount kit. Art. no. 009912 ► 37 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 39
Accessories Mounting accessories for EW-DP EK Mounting kit for attaching the EW-DP EK portable receiver to cameras, cages or sound bags. ▷ Startup and operation: „EW-DP EK portable receiver" Mounting plate (single) | Art. no. 588188 Mounting plate set | Art. no. 700005 38 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 40
-DP EK Accessories 3.5 mm jack cable, 3.5 mm Y-cable and 3.5 mm XLR cable for connecting one or more EW-DP EK units to a camera. ▷ Startup and operation: „EW-DP EK portable receiver" CL 35 | 3.5 mm jack cable | Art no. 586365 CL 35-Y | 3.5 mm Y-cable | Art. no. 700061 CL 35 XLR | 3.5 mm XLR cable - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 41
ranges can be found in the download area of the Sennheiser website at: www.sennheiser.com/download ▷ Enter EW-D or EW-DP in the search bar to show the fre- quency tables. EW-D | EW-DP The products EW-D EM, EW-D SKM-S, EW-D SK and EW-DP EK are available in the following frequency ranges: ► 40 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 42
Frequency ranges EW-DX The EW-DX EM 2, EW-DX SKM, EW-DX SKM-S, EW-DX SK and EW-D SK 3-PIN products are available in the following frequency ranges: ► 41 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 43
Frequency ranges Accessories The EW-D AB antenna booster and the Half Wave Dipole rod antennas are available in the following frequency ranges: ► The EW-D ASA antenna splitter is available in the following frequency ranges: ► 42 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 44
series INSTRUCTION MANUAL Starting up and operating devices of the Evolution Wireless Digital series Products of the EW-D series ▷ "EW-D EM rack receiver" ▷ "EW-D SKM-S handheld transmitter" ▷ "EW-D SK bodypack transmitter" Products of the EW-DX series ▷ "EW-DX EM 2 rack receiver" ▷ "EW-DX SKM | EW - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 45
EW-D EM rack receiver EW-D EM rack receiver Product overview Front 1 LINK and DATA LEDs to indicate connection status and Bluetooth status • See "Meaning of the LEDs" 2 Display for status - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 46
Back EW-D EM rack receiver 7 Strain relief for the connection cable of the power supply unit • See "Connecting/disconnecting the receiver to/from the power supply system" 8 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 47
EW-D EM rack receiver Connecting/disconnecting the receiver to/ from the power supply system Only use the supplied power supply unit. It is designed for your - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 48
EW-D EM rack receiver To completely disconnect the receiver from the power supply system: ▷ Unplug the power supply unit from the in the figure. If you are using more than one receiver, we recommend using remote antennas and possibly the EW-D ASA antenna splitter ("EW-D ASA antenna splitter"). 47 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 49
Connecting remote antennas To connect remote antennas: ► EW-D EM rack receiver ▷ Connect the antennas to the two antenna inputs on the receiver If you are using more than one receiver, we recommend using remote antennas and possibly the EW-D ASA antenna splitter ("EW-D ASA antenna splitter"). 48 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 50
use only one of the two output sockets. To connect an XLR cable: ▷ Plug the XLR cable into the AF out Bal socket on the EW-D EM. To connect a jack cable: ▷ Plug the jack cable into the AF out Unbal socket on the - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 51
EW-D EM rack receiver Installing receivers in a rack Observe the following instructions when mounting the receiver in a rack. The mounting brackets for installing the receiver in the rack can be found in the packaging under the tray: - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 52
EW-D EM rack receiver Mounting a single receiver in a rack ▷ Connect the mounting brackets to the sides of the receiver as shown. ▷ Attach the front panel as - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 53
EW-D EM rack receiver Mounting two receivers side by side in a rack ▷ Place both receivers upside down and side by side on an even surface. ▷ Tighten the jointing plate as shown. ▷ Attach the mounting brackets as shown. 52 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 54
EW-D EM rack receiver Switching the receiver on and off To switch the receiver on: ▷ Short-press the ON/OFF button. The receiver switches on. To - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 55
EW-D EM rack receiver Lock-off function To activate the key lock: ▷ Press the UP and DOWN buttons simultaneously. Key lock is activated and the lock - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 56
Meaning of the LEDs EW-D EM rack receiver The LINK and DATA LEDs on the front of the receiver can indicate the following information. LINK LED The LINK LED provides - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 57
provides information on the receiver's Bluetooth Low Energy link to the EW-D Smart Assist app and on the synchronization of transmitters and receivers being established be- tween the receiver and a smartphone or tablet with the EW-D Smart Assist app. or ▷ The receiver is being synchronized with a - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 58
EW-D EM rack receiver Displays on the receiver's display panel Status information such as frequency, reception quality, battery status and audio level is shown on the - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 59
rack receiver Frequency: "AUTO SCAN menu item" | "CHANNEL menu item" | "TUNE menu item" Connecting to the app: "EW-D Smart Assist app" Lock-off function: "Lock-off function" Menu: "Making settings in the menu" Transmitter battery: SKM-S -> "Inserting and removing the batteries/rechargeable batteries - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 60
EW-D EM rack receiver Making settings in the menu Buttons for navigating the menu Use the following buttons to navigate through the receiver's operating menu. ► Press - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 61
EW-D EM rack receiver Opening the menu and navigating the menu items To open the menu: ▷ Press the SET button. The first menu item GAIN flashes. ► - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 62
gain refers to the configuration where the audio signal arriving at a device leaves the device with the same level. Example: If you are using an EW-D wireless link instead of a guitar cable, with unity gain settings, the volume of the guitar in the guitar amplifier will be as high as it - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 63
EW-D EM rack receiver ► ▷ Press the UP or DOWN button to adjust the value. the audio signal arriving at a device leaves the device with the same level. Example: If you are using an EW-D wireless link instead of a guitar cable, with unity gain settings, the volume of the guitar in the guitar amplifier - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 64
ter's mute switch is disabled. ► EW-D EM rack receiver ▷ Press the SET button to save the set value. AUTO SCAN menu item Under the AUTO SCAN menu item, you can perform - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 65
EW-D EM rack receiver CHANNEL menu item Under the CHANNEL menu item, you can set the radio frequency by selecting a preset channel. If you are not - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 66
EW-D EM rack receiver TUNE menu item Under the TUNE menu item, you can manually set the radio frequency independently of the preset channels. If you are not sure whether the selected frequency is free, we recommend performing a scan to - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 67
EW-D EM rack receiver RESET menu item Under the RESET menu item, you can reset the receiver to its factory settings. ▷ Open the RESET menu item. - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 68
-D Color Coding Sets to label transmission paths You can use the EW-D Color Coding Sets (see "Color Coding Sets") to identify which transmitters belong to which receivers. This makes it easier to match up the individual devices, - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 69
-D SKM-S handheld transmitter EW-D SKM-S handheld transmitter Product overview ► 1 ON/OFF button • See "Switching the handheld transmitter on and off" 2 DATA LED • See "Meaning of the LEDs" 3 SYNC button • - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 70
EW-D SKM-S handheld transmitter Inserting and removing the batteries/rechargeable batteries You can operate the handheld transmitter either with batteries (AA, 1.5 V) or with the rechargeable Sennheiser BA 70 battery. ▷ Unscrew the microphone housing as shown in the figure and pull it down as far as - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 71
EW-D SKM-S handheld transmitter Replacing the microphone module To replace the microphone module: ▷ Unscrew the microphone module. ▷ Screw the desired microphone module on. ▷ Do not touch - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 72
EW-D SKM-S handheld transmitter • MMD 945-1 | Dynamic microphone module with super-cardioid pick-up pattern • MMK 965-1 | Condenser microphone module with selectable pattern: cardioid and super- - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 73
-D Color Coding Sets to label transmission paths You can use the EW-D Color Coding Sets (see "Color Coding Sets") to identify which transmitters belong to which receivers. This makes it easier to match up the individual devices, - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 74
EW-D SKM-S handheld transmitter Switching the handheld transmitter on and off To switch the handheld transmitter on: ▷ Short-press the ON/OFF button. The LINK LED - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 75
EW-D SKM-S handheld transmitter Checking the battery status of the transmitter (Check function) To check the battery status of the transmitter: ▷ Short-press the ON/OFF - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 76
EW-D SKM-S handheld transmitter Identifying the paired receiver (Identify function) In multi-channel systems, you can use the Check function to quickly identify to which receiver - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 77
EW-D SKM-S handheld transmitter Meaning of the LEDs The LINK and DATA LEDs on the bottom of the transmitter can indicate the following information. LINK LED - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 78
EW-D SKM-S handheld transmitter The LED is continuously red: ▷ The (rechargeable) battery in the transmitter is dead. The LED is flashing red: ▷ The link between the - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 79
EW-D SKM-S handheld transmitter Establishing a connection to the receiver To establish a radio link between the transmitter and the receiver, the devices country. Before putting the product into operation, find the information for your country at the following address: www.sennheiser.com/sifa 78 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 80
EW-D SKM-S handheld transmitter Muting the handheld transmitter You can mute the audio signal using the mute switch. ► ▷ Slide the mute switch to the desired position - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 81
bodypack transmitter EW-D SK bodypack transmitter Product overview ► 1 SYNC button • See "Establishing a radio link | Synchronizing the receiver and transmitter" 2 DATA LED • See "Meaning of the LEDs" 3 LINK LED • - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 82
EW-D SK bodypack transmitter Inserting and removing the batteries/rechargeable batteries You can operate the bodypack transmitter either with batteries (AA, 1.5 V) or with the rechargeable Sennheiser BA 70 battery. ▷ Press the two catches and open the battery compartment cover. ▷ Insert the - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 83
EW-D SK bodypack transmitter Connecting a microphone to the bodypack transmitter To connect a microphone to the bodypack transmitter: ▷ Insert the cable's 3.5 mm jack plug into the socket - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 84
EW-D SK bodypack transmitter Headset microphones: • ME 3 | Headset microphone with cardioid pattern (models from 2021 and later with gold-plated plug*) • HSP Essential Omni | Headset microphone - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 85
EW-D SK bodypack transmitter Connecting an instrument or line source to the plug on a lockable 3.5 mm jack plug) or CL 2 (XLR-3F plug on a lockable 3.5 mm jack plug) Sennheiser cables. To connect an instrument or line source to bodypack transmitter: ▷ Insert the cable's 3.5 mm jack plug into the - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 86
-D Color Coding Sets to label transmission paths You can use the EW-D Color Coding Sets (see "Color Coding Sets") to identify which transmitters belong to which receivers. This makes it easier to match up the individual devices, - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 87
EW-D SK bodypack transmitter Changing the belt clip You can change the belt clip on the bodypack transmitter or flip it over depending on how you - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 88
EW-D SK bodypack transmitter Switching the bodypack transmitter on and off To switch the bodypack transmitter on: ▷ Short-press the ON/OFF button. The LINK LED - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 89
EW-D SK bodypack transmitter Checking the battery status of the transmitter (Check function) To check the battery status of the transmitter: ▷ Short-press the ON/OFF - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 90
EW-D SK bodypack transmitter Identifying the paired receiver (Identify function) In multi-channel systems, you can use the Check function to quickly identify to which receiver - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 91
EW-D SK bodypack transmitter Meaning of the LEDs The LINK and DATA LEDs on the top of the transmitter can indicate the following information. LINK LED - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 92
EW-D SK bodypack transmitter The LED is continuously red: ▷ The (rechargeable) battery in the transmitter is dead. The LED is flashing red: ▷ The link between the - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 93
EW-D SK bodypack transmitter Establishing a connection to the receiver To establish a radio link between the transmitter and the receiver, the devices your country. Before putting the product into operation, find the information for your country at the following address: www.sennheiser.com/sifa 92 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 94
EW-D SK bodypack transmitter Muting the bodypack transmitter You can mute the audio signal using the mute switch. ► ▷ Slide the mute switch to the desired position - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 95
EM 2 rack receiver EW-DX EM 2 rack receiver Product overview Front 1 Headphone socket • See "Using the headphone output" 2 Volume control for the headphone socket • See "Using the headphone output" 3 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 96
EW-DX EM 2 rack receiver 8 Jog dial (UP/DOWN/SET) for navigating the operating menu • See "Buttons for navigating the menu" 9 ESC button for canceling an - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 97
EW-DX EM 2 rack receiver 15 XLR-3 socket for AF out Balanced audio output for channel 2 • See "Outputting audio signals" 16 XLR-3 socket for AF out - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 98
EW-DX EM 2 rack receiver Connecting/disconnecting the receiver to/ from the power supply system You can operate the receiver using either the included power supply - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 99
EW-DX EM 2 rack receiver To completely disconnect the receiver from the power supply system: ▷ Unplug the power supply unit from the wall socket. ▷ Unplug the power supply unit from the DC in socket on the receiver. 98 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 100
EW-DX EM 2 rack receiver Power over Ethernet (PoE) The receiver can be powered via Power over Ethernet (PoE IEEE 802.3af Class 0). ▷ Connect the receiver to a PoE-enabled network switch. 99 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 101
into your existing network infrastructure with any other types of devices. For more information about controlling devices via the Sennheiser Wireless Systems Manager or Sennheiser Control Cockpit software, refer to the instruction manual for the software. You can download the software here: www - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 102
EW-DX EM 2 rack receiver Connecting antennas Connecting rod antennas To connect the supplied rod antennas: ► ▷ Connect the antennas in the figure. If you are using more than one receiver, we recommend using remote antennas and possibly the EW-D ASA antenna splitter ("EW-D ASA antenna splitter"). 101 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 103
EW-DX EM 2 rack receiver Connecting remote antennas To connect remote antennas: ► ▷ Connect the antennas to the two AD 1800 | 1400 - 2400 MHz If you are using more than one receiver, we recommend using remote antennas and possibly the EW-D ASA antenna splitter ("EW-D ASA antenna splitter"). 102 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 104
2 rack receiver Outputting audio signals Each of the two channels on the EW-DX EM 2 has both a balanced XLR-3M output socket and an Plug the XLR cable into the AF out Balanced socket for the respective channel on the EW-DX EM 2. To connect a jack cable: ▷ Plug the jack cable into the AF out Unbalanced - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 105
EW-DX EM 2 rack receiver Installing receivers in a rack Observe the following instructions when mounting the receiver in a rack. The mounting brackets for installing the receiver in the rack can be found in the packaging under the tray: - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 106
EW-DX EM 2 rack receiver Mounting a single receiver in a rack ▷ Connect the mounting brackets to the sides of the receiver as shown. ▷ Attach the front panel - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 107
EW-DX EM 2 rack receiver Mounting two receivers side by side in a rack ▷ Place both receivers upside down and side by side on an even surface. ▷ Tighten the jointing plate as shown. ▷ Attach the mounting brackets as shown. 106 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 108
EW-DX EM 2 rack receiver Switching the receiver on and off To switch the receiver on: ▷ Short-press the ON/OFF button. The receiver switches on. - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 109
EW-DX EM 2 rack receiver Using the headphone output You can use the headphone output on the front of the receiver (6.3 mm jack) to listen to - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 110
Meaning of the LEDs EW-DX EM 2 rack receiver The two LEDs on the front of the receiver indicate the following information for channel 1 and channel 2. The LED is green: ▷ - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 111
EW-DX EM 2 rack receiver The LED is flashing red: ▷ The link between ▷ The Bluetooth Low Energy link is being established be- tween the receiver and a smartphone or tablet with the EW-D Smart Assist app. or ▷ The receiving channel is being synchronized with a transmitter. The LED is continuously blue - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 112
displayed here. Channel 1 Channel 2 Link name Frequency Transmitter Antenna battery switching diversity Q EW-DX 1 Radio frequency 510.100 level 9:21 Link name Frequency Transmitter battery EW-DX 2 Q 521.100 Antenna switching diversity Link quality Link quality Transmitter audio level - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 113
EW-DX EM 2 rack receiver Radio frequency level: Displays the RF signal link in the receiver menu (see "Ch 1 / Ch 2 -> Name menu item"). Frequency: You can set the frequency of the radio link manually or using the Auto-Setup function. • See "Ch 1 / Ch 2 -> Frequency menu item" • See "Ch 1 / Ch 2 -> - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 114
switch on the received transmitter is set to AF Mute and the audio signal is muted. ▷ EW-DX SKM-S: "Configuring mute mode and muting the handheld transmitter (EW-DX SKM-S only)" ▷ EW-DX SK: "Configuring mute mode and muting the bodypack transmitter" Headphones: The headphones icon indicates which - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 115
EW-DX EM 2 rack receiver System icons: The LD icon is displayed when Link Density mode is activated. See "System -> Link Density menu item". The network - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 116
Channel 1 EW-DX EM 2 rack receiver ▷ On the receiver's home screen, press the CH 1 button. The home screen for channel 1 appears. In addition to the status information - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 117
EW-DX EM 2 rack receiver ▷ Press the jog dial to confirm your selection. Channel 2 ▷ On the receiver's home screen, press the CH 2 button. The home screen for channel 2 appears. You can view and configure the same information as for channel 1. 116 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 118
EW-DX EM 2 rack receiver Buttons for navigating the menu Use the following buttons to navigate through the receiver's operating menu. ► Press the jog dial • Jumps - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 119
EW-DX EM 2 rack receiver ► Press the ESC button • Cancels the entry and returns to the previous display Opening the menu and navigating the menu items - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 120
EW-DX EM 2 rack receiver Menu structure The figure shows the complete menu structure in an overview. Version: firmware 1.1.3 119 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 121
EW-DX EM 2 rack receiver Setting options in the menu In the receiver menu, you can configure the following settings. Changing the name of the radio - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 122
EW-DX EM 2 rack receiver Enabling the transmitter's automatic lock-off function ▷ "Ch 1 / Ch 2 -> Auto Lock menu item" Configuring the behavior of the transmitter's LEDs ▷ "Ch 1 / - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 123
EW-DX EM 2 rack receiver Ch 1 / Ch 2 -> Name menu item In the Name menu item, you can define the name of the For the chosen link name to appear on the display of the received transmitter, you must synchronize the channel ("Connecting to the EW-DX EM 2 receiver / synchronizing the EWDX EM 2"). 122 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 124
EW-DX EM 2 rack receiver Ch 1 / Ch 2 -> Frequency menu item In the Frequency menu item, you can adjust the frequency for the channel in question. You can select a frequency from the predefined list or set the frequency manually. To open the Frequency menu item: ▷ In the menu, navigate to the - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 125
EW-DX EM 2 rack receiver Selecting a frequency from a predefined list To select a frequency from a (WSM) software and upload it to the receiver. For more information on the WSM software, see: www.sennheiser.com/wsm ▷ Press the jog dial to confirm your selection. ▷ Rotate the jog dial to select the - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 126
EW-DX EM 2 rack receiver Setting the frequency manually To set the frequency manually: ▷ Open the Frequency subitem. ▷ Turn the jog dial to set the MHz range for the frequency. ▷ Press the jog dial to confirm your selection. ▷ Turn - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 127
the Gain menu item, you can set the audio level of the audio signal coming from the received transmitter (e.g. vocals or speech via EW-DX SKM or guitar via EW-DX SK). • Setting range: 3 dB to +42 dB in increments of 3 dB To open the Gain menu item: ▷ In the menu, navigate - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 128
EW-DX EM 2 rack receiver Ch 1 / Ch 2 -> AF Out menu item In the AF Out menu item, you can set the audio level that is output - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 129
EW-DX EM 2 rack receiver Ch 1 / Ch 2 -> Trim menu item In the Trim menu item, you can adjust the audio level of the received For the set value to be applied to the received transmitter, you must synchronize the channel ("Connecting to the EWDX EM 2 receiver / synchronizing the EW-DX EM 2"). 128 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 130
set the value of the low cut filter for the respective channel. • Setting range: • for EW-DX SK | EW-DX SK 3-PIN: Off, 30 Hz, 60 Hz, 80 Hz, 100 Hz, 120 Hz • for EW-DX SKM | EW-DX SKM-S: 60 Hz, 80 Hz, 100 Hz, 120 Hz To open the Low Cut menu - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 131
EW-DX EM 2 rack receiver Ch 1 / Ch 2 -> Cable Emul. menu item In the Cable Emul. menu item, you can emulate instrument cable lengths: • Setting range: Off, - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 132
2 -> Mute Mode menu item In the Mute Mode menu item, you can set the function of the mute switch on the connected transmitter (EW-DX SK, EW-DX SK 3-PIN, EW-DX SKM-S). • Setting range: • Disabled: The mute switch has no function. • RF Mute: The RF signal is deactivated when the mute switch - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 133
the transmitter's menu while the lock-off is active, you have to temporarily disable the lockoff: ▷ EW-DX SKM: "Lock-off function" ▷ EW-DX SK: "Lock-off function" To open the Auto Lock menu item: ▷ In the menu the channel ("Connecting to the EWDX EM 2 receiver / synchronizing the EW-DX EM 2"). 132 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 134
EW-DX EM 2 rack receiver Ch 1 / Ch 2 -> LED menu item The LED menu item allows you to set the behavior of the LINK LED on . For the set value to be applied to the received transmitter, you must synchronize the channel ("Connecting to the EWDX EM 2 receiver / synchronizing the EW-DX EM 2"). 133 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 135
EW-DX EM 2 rack receiver Ch 1 / Ch 2 -> Sync Parameters menu item In the Sync Parameters menu item, you can choose which settings for the transmitter you - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 136
EW-DX EM 2 rack receiver ▷ For each option, select whether it will be synchronized or not. The value set for this function will be transferred during synchronization. The value set for this function will not be transferred during synchronization. ▷ Press the jog dial to save your setting. 135 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 137
the free frequencies in the selected frequency range. The automatic frequency setup can be used to distribute the free frequencies to all of the EW-DX EM 2 devices available in the network automatically. ▷ Switch off all transmitters before you perform the scan. If transmitters are still switched on - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 138
EW-DX EM 2 rack receiver ▷ Press the jog dial to open your selected option. ▷ Select a frequency from which to start the scan. ▷ Press the jog dial - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 139
EW-DX EM 2 rack receiver Ch 1 / Ch 2 -> TX Software menu item The TX Software menu item displays the software version of the received transmitter. You cannot - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 140
EW-DX EM 2 rack receiver Network In this menu item, you can configure the settings for the network connection. ▷ "System -> Network menu item" TX Update This - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 141
EW-DX EM 2 rack receiver System -> Encryption menu item You can secure the radio link between the transmitter and receiver using AES 256 encryption. To open - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 142
EW-DX EM 2 rack receiver System -> Link Density menu item Link Density mode (LD mode) LD mode doubles the number of usable carrier frequencies in the - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 143
EW-DX EM 2 rack receiver ▷ Press the jog dial to restart the receiver. or ▷ Press the ESC button to cancel the mode change. After enabling LD mode and restarting the receiver, the connected transmitter must be resynchronized with the receiver to enable LD mode on the transmitter as well. 142 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 144
EW-DX EM 2 rack receiver System -> Network menu item In this menu item, You can make the following settings here: Mode • Auto: The network configuration is performed automatical- ly. • Manual: The network configuration can be performed man- ually. mDNS You can enable or disable this option if you - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 145
EW-DX EM 2 rack receiver IP • If the Mode option is set to Auto, the automatically as- signed IP address is displayed here. • If the Mode option is set to Manual as- signed netmask is displayed here. • If the Mode option is set to Manual, you can set the net- mask here. Gateway • If the Mode option - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 146
EW-DX EM 2 rack receiver System -> TX Update menu item This menu item lets you perform a firmware update for the transmitters. This update is recommended after - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 147
EW-DX EM 2 rack receiver shows the remaining time. The system carries out the firmware update for the transmitter. The progress of the update is shown - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 148
EW-DX EM 2 rack receiver System -> Auto Setup menu item In this menu item, you can activate the Auto Setup function for the receiver. If the - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 149
EW-DX EM 2 rack receiver System -> This Device menu item This menu item allows you to change the device name, view software and hardware information, or - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 150
EW-DX EM 2 rack receiver Updating the firmware of the receiver You can update the receiver firmware using the Sennheiser Control Cockpit software or the Wireless Systems Manager software. ▷ To do so, connect the receiver to a network (see "Connect- ing receivers in a network") and establish - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 151
navigating the handheld transmitter's menu" 6 Display panel • See "Information on the handheld transmitter's display" 7 Mute switch (EW-DX SKM-S only) • See "Configuring mute mode and muting the handheld transmitter (EW-DX SKM-S only)" 8 Microphone module • See "Replacing the microphone module" 150 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 152
DX SKM | EW-DX SKM-S handheld transmitter Inserting and removing the batteries/rechargeable batteries You can operate the handheld transmitter either with batteries (AA, 1.5 V) or with the rechargeable Sennheiser BA 70 battery. ▷ Unscrew the microphone housing as shown in the figure and pull it down - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 153
-DX SKM | EW-DX SKM-S handheld transmitter Replacing the microphone module To replace the microphone module: ▷ Unscrew the microphone module. ▷ Screw the desired microphone module on. ▷ Do not - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 154
-DX SKM | EW-DX SKM-S handheld transmitter • MMD 945-1 | Dynamic microphone module with super-cardioid pick-up pattern • MMK 965-1 | Condenser microphone module with selectable pattern: cardioid and - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 155
EW-DX SKM | EW-DX SKM-S handheld transmitter Switching the handheld transmitter on and off To switch the handheld transmitter on: E-Ink display still displays the parameters after it is switched off. ► Display when transmitter is switched on: EW-DX 1 510.100 Display when transmitter is switched off - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 156
EW-DX SKM | EW-DX SKM-S handheld transmitter Checking the battery status of the transmitter (Check function) To check the battery status of the transmitter: ▷ Short-press the ON/ - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 157
EW-DX SKM | EW-DX SKM-S handheld transmitter Identifying the paired receiver (Identify function) In multi-channel systems, you can use the Check function to quickly identify to which - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 158
EW-DX SKM | EW-DX SKM-S handheld transmitter Meaning of the LEDs The LINK and DATA LEDs on the bottom of the transmitter can indicate the following information. LINK - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 159
EW-DX SKM | EW-DX SKM-S handheld transmitter The LED is continuously red: ▷ The (rechargeable) battery in the transmitter is dead. The LED is flashing red: ▷ The link between - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 160
EW-DX SKM | EW-DX SKM-S handheld transmitter Establishing a connection to the receiver To establish a radio link between the transmitter and the receiver country. Before putting the product into operation, find the information for your country at the following address: www.sennheiser.com/sifa 159 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 161
following information on the transmitter display. Link name Frequency EW-DX 1 510.100 6:43 Battery status Further information 's menu (see "Frequency menu item"). The frequency of the radio link can also be set manually in the receiver's menu (see "Ch 1 / Ch 2 -> Frequency menu item") or via - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 162
)") to display the battery status for approx. 5 seconds. System icons: The transmitter's mute switch is deactivated. See "Mute Button menu item (only EW-DX SKM-S)". The Auto Lock function is activated. See "Auto Lock menu item". AES 256 encryption is enabled. See "System -> Encryption menu item - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 163
EW-DX SKM | EW-DX SKM-S handheld transmitter Note that the transmitter's permanent E-Ink display still displays the parameters after it is switched off. Display when transmitter is switched on: EW-DX 1 510.100 Display when transmitter is switched off: EW-DX 1 510.100 off 162 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 164
DX SKM | EW-DX SKM-S handheld transmitter Buttons for navigating the handheld transmitter's menu Use the following buttons to navigate through the transmitter's operating menu. ► Press the SET - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 165
-DX SKM | EW-DX SKM-S handheld transmitter Making settings in the menu of the handheld transmitter Navigating through the menu To open the menu: ▷ Press the SET button. - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 166
EW-DX SKM | EW-DX SKM-S handheld transmitter ▷ At the last position, press the SET button to save the selected name. If you enter a name for the radio link - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 167
EW-DX SKM | EW-DX SKM-S handheld transmitter ▷ Press the UP or DOWN button to set the desired value. ▷ Press the SET button to confirm your selection. If you - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 168
. ▷ Press the SET button to confirm your selection. Mute Button menu item (only EWDX SKM-S) This function is only available for the EW-DX SKM-S version, not for the EW-DX SKM version. In this menu item you can set the function of the transmitter's mute switch. • Setting range: • Disabled: The mute - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 169
-DX SKM | EW-DX SKM-S handheld transmitter The lock-off prevents the transmitter from being unintentionally switched off and also prevents any changes to the transmitter's menu. If - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 170
EW-DX SKM | EW-DX SKM-S handheld transmitter ▷ Press the UP or DOWN button to set the desired value. ▷ Press the SET button to confirm your selection. If you - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 171
EW-DX SKM | EW-DX SKM-S handheld transmitter ▷ Press the UP or DOWN button to set the desired value. ▷ Press the SET button to confirm your selection. 170 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 172
EW-DX SKM | EW-DX SKM-S handheld transmitter Lock-off function You can enable or disable the automatic lock-off function in the Auto Lock menu item (see "Auto - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 173
mute switch in the Mute Mode menu item. ▷ On the receiver: "Ch 1 / Ch 2 -> Mute Mode menu item" ▷ On the transmitter: "Mute Button menu item (only EW- DX SKM-S)" AF Mute ▷ Slide the mute switch to the desired position to mute or activate the audio signal. RF Mute ▷ Slide the mute switch - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 174
• See "Configuring mute mode and muting the bodypack transmitter" 5 Display panel • See "Information on the bodypack transmitter's display" 6 EW-DX SK: 3.5 mm jack socket EW-DX SK 3-PIN: 3-pin socket • See "Connecting a microphone to the bodypack transmitter" • See "Connecting an instrument or line - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 175
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Inserting and removing the batteries/rechargeable batteries You can operate the bodypack transmitter either with batteries (AA, 1.5 V) or with the rechargeable Sennheiser BA 70 battery. ▷ Press the two catches and open the battery compartment cover. ▷ - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 176
's coupling ring onto the audio socket thread of the bodypack transmitter. Compatible microphones The following microphones are compatible with the EW-DX SK bodypack transmitter: Lavalier microphones: • ME 2 | Lavalier microphone with omni-directional pattern (models from 2021 and later with gold - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 177
DX SK | EW-DX SK 3-PIN bodypack transmitter • MKE 2 Gold | Lavalier microphone with omni-directional pattern (models from 2018 and later with blue serial number label) • MKE 1 | Lavalier - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 178
-DX SK 3-PIN bodypack transmitter Connecting a microphone to the EW-DX SK 3-PIN To connect a microphone to the EW-DX SK 3-PIN bodypack transmitter: ▷ Insert the cable's three-pin plug into the socket on the bodypack transmitter as shown in the diagram. ▷ Screw the - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 179
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Headset microphones: • HSP Essential Omni Black-3-Pin | Headset microphone with omni-directional pattern • HSP Essential Omni Beige-3-Pin | Headset microphone - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 180
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Connecting an instrument or plug on a lockable 3.5 mm jack plug) or CL 2 (XLR-3F plug on a lockable 3.5 mm jack plug) Sennheiser cables. To connect an instrument or line source to bodypack transmitter: ▷ Insert the cable's 3.5 mm jack plug into the - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 181
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Connecting an instrument or line source to the EWDX SK 3-PIN You can connect instruments or audio sources with a line level to the bodypack transmitter. To do so, you require the Sennheiser CI 1-4 cable (6.3 mm (1/ 4") jack plug to screw-on 3-pin audio - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 182
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Changing the belt clip You can change the belt clip on the bodypack transmitter or flip it over depending on - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 183
-DX SK | EW-DX SK 3-PIN bodypack transmitter Switching the bodypack transmitter on and off To switch the bodypack transmitter on: E-Ink display still displays the parameters after it is switched off. Display when transmitter is switched on: EW-DX 1 510.100 Display when transmitter is switched off - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 184
-DX SK | EW-DX SK 3-PIN bodypack transmitter Checking the battery status of the transmitter (Check function) To check the battery status of the transmitter: ▷ Short-press the - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 185
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Identifying the paired receiver (Identify function) In multi-channel systems, you can use the Check function to quickly identify to - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 186
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Meaning of the LEDs The LINK and DATA LEDs on the top of the transmitter can indicate the following information. - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 187
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter The LED is continuously red: ▷ The (rechargeable) battery in the transmitter is dead. The LED is flashing red: ▷ The link - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 188
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Establishing a connection to the receiver To establish a radio link between the transmitter and the your country. Before putting the product into operation, find the information for your country at the following address: www.sennheiser.com/sifa 187 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 189
following information on the transmitter display. Link name Frequency EW-DX 1 510.100 6:43 Battery status Further information System 's menu (see "Frequency menu item"). The frequency of the radio link can also be set manually in the receiver's menu (see "Ch 1 / Ch 2 -> Frequency menu item") or - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 190
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Battery status: Displays the charging status of the batteries or the BA 70 battery pack. When using the BA 70 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 191
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Note that the transmitter's permanent E-Ink display still displays the parameters after it is switched off. Display when transmitter is switched on: EW-DX 1 510.100 Display when transmitter is switched off: EW-DX 1 510.100 off 190 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 192
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Buttons for navigating the menu of the bodypack transmitter Use the following buttons to navigate through the transmitter's operating menu. ► - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 193
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Making settings in the menu of the bodypack transmitter Navigating through the menu To open the menu: ▷ Press the SET - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 194
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter ▷ At the last position, press the SET button to save the selected name. If you enter a name for the radio - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 195
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter ▷ Press the UP or DOWN button to set the desired value. ▷ Press the SET button to confirm your selection. If - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 196
-DX SK | EW-DX SK 3-PIN bodypack transmitter ▷ Press the SET button to confirm your selection. If you set a value for the channel in the Cable Emul. menu - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 197
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter in the transmitter is overwritten with the value entered in the receiver. Auto Lock menu item In this menu item, - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 198
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter LED menu item This menu item allows you to set the behavior of the transmitter's LINK LED. • Setting range: • ON: - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 199
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Reset to factory settings ▷ Press the SET button to open the Reset menu item. ▷ Press the UP or DOWN button to set the desired value. ▷ Press the SET button to confirm your selection. 198 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 200
-DX SK | EW-DX SK 3-PIN bodypack transmitter Lock-off function You can enable or disable the automatic lock-off function in the Auto Lock menu item (see " - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 201
EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Configuring mute mode and muting the bodypack transmitter You can mute the bodypack transmitter by using the mute switch to - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 202
EK portable receiver EW-DP EK portable receiver Product overview Front 1 Display for status information and operating menu • See "Displays on the receiver's display panel" 2 LINK and DATA LEDs - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 203
Side EW-DP EK portable receiver 6 3.5 mm jack socket for headphones • See "Outputting audio signals" 7 USB-C connection socket for power supply • See "Power supply" 8 3.5 mm jack socket for connecting cable • See "Outputting audio signals" 202 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 204
EK portable receiver Power supply The EW-DP EK can be powered in two different ways: Power supply via USB-C from a camera or power bank: SET ESC SYNC Powerbank ▷ Connect the receiver - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 205
ESC SYNC (included in scope of delivery) optional: 2 AA batteries ▷ Open the EW-DP EK unit's battery compartment by pressing in the two release buttons on the sides. controlled by the EK unit. The EW-DP EK supports the USB Power Delivery Protocol for smart USB-C power supply units (USB-C PD). - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 206
-DP EK portable receiver Outputting audio signals The EW-DP EK has an unbalanced 3.5 mm audio output and an unbalanced 3.5 mm headphone output. CAUTION Danger due to high volume lowest volume setting. To connect a 3.5 mm jack cable: ▷ Plug the jack cable into the MIC OUT socket on the EW-DP EK. 205 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 207
EW-DP EK portable receiver Mounting the receiver / mounting options EW-DP EK mounting accessories: 206 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 208
EW-DP EK portable receiver Combining the mounting plate and hot shoe adapter: The hot shoe adapter can be fitted to the mounting plate in different - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 209
Mounting plate and clip: EW-DP EK portable receiver As an alternative to the hot shoe adapter, a metal clip can be attached to the side of the mounting plate. To - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 210
EW-DP EK portable receiver Mounting/stacking receivers on the mounting plate: The receiver has magnets on the bottom, which means you can simply magnetic feet into the recesses on the mounting plate. Two stacked receivers can be connected to one another using a Y-cable. See "Cables for EW-DP EK" 209 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 211
EW-DP EK portable receiver Mounting with the mounting plate in a rotated position: To mount the receiver with the mounting plate rotated by 90°: ▷ Turn the - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 212
EW-DP EK portable receiver Example for mounting on a DSLR or video camera: To mount the mounting plate with hot shoe adapter on a DSLR or video - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 213
EW-DP EK portable receiver Example for mounting on camera cages: To attach the mounting plate to a camera cage: ▷ Screw the mounting plate to the camera cage using one or two screws, depending on the mounting situation and position. ▷ Attach the receiver to the mounting plate. 212 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 214
EW-DP EK portable receiver Example for attaching to pockets and belts: To fasten the receiver with mounting plate to pockets or belts: ▷ Attach the clip - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 215
EW-DP EK portable receiver Example for mounting on tripods: To fasten the mounting plate to a tripod: ▷ Screw the mounting plate onto the tripod thread at the de- sired position. Now you can attach one or two receivers to the mounting plate. 214 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 216
EW-DP EK portable receiver Switching the receiver on and off To switch the receiver on: ▷ Short-press the ON/OFF button. The receiver switches on. To switch the receiver off: ▷ Press the ON/OFF button. ▷ The receiver switches off. 215 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 217
Meaning of the LEDs EW-DP EK portable receiver The LINK and DATA LEDs on the front of the receiver can indicate the following information. LINK LED The LINK LED - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 218
provides information on the receiver's Bluetooth Low Energy link to the EW-D Smart Assist app and on the synchronization of transmitters and receivers being established be- tween the receiver and a smartphone or tablet with the EW-D Smart Assist app. or ▷ The receiver is being synchronized with a - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 219
in the menu"). Display page Mute switch Receiver battery (EK) Transmitter battery (SK / SKM-S) Transmitter audio level PEAK display 7:30h 12:00h EW-D 470.200 MHz (01) +18 dB Frequency Link name Channel Gain Radio frequency level Further information Display page: "Main view and advanced - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 220
EW-DP EK portable receiver Link name: Can be changed in the Smart Assist app. Receiver battery: "Power supply" Transmitter battery: SKM-S -> "Inserting and removing the - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 221
EW-DP EK portable receiver Making settings in the menu Buttons for navigating the menu Use the following buttons to navigate through the receiver's operating menu. ► - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 222
EW-DP EK portable receiver Main view and advanced view After the device switches on, the display shows the main view. ► See "Displays on the receiver's - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 223
EW-DP EK portable receiver To open a menu item: ▷ Navigate to the desired menu item until it flashes. ▷ Press the SET button to open the selected - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 224
EW-DP EK portable receiver Headphone menu item Under the Headphone menu item, you can set the volume of the audio signal coming from the receiver's - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 225
EW-DP EK portable receiver MUTE switch menu item Under the MUTE switch menu item, you can disable the mute switch on the paired transmitter. The - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 226
EW-DP EK portable receiver AUTO SCAN menu item Under the AUTO SCAN menu item, you can perform an automatic frequency scan of your area. This - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 227
EW-DP EK portable receiver CHANNEL menu item Under the CHANNEL menu item, you can set the radio frequency by selecting a preset channel. If you are - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 228
EW-DP EK portable receiver Frequency menu item Under the FREQUENCY menu item, you can manually set the radio frequency independently of the preset channels. If you are not sure whether the selected frequency is free, we recommend performing a scan to - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 229
EW-DP EK portable receiver BRIGHTNESS menu item Under the BRIGHTNESS menu item, you can set the brightness of the display. ▷ Open the BRIGHTNESS menu item. - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 230
a radio link | Synchronizing the receiver and transmitter Information on compatibility between EW-D, EWDX and EW-DP The transmitter and the receiver are fully compatible with each other. The operation, find the information for your country at the following address: www.sennheiser.com/sifa 229 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 231
establish a connection between a receiver and transmitters of the EW-D series, the devices must always be synchronized with each other item"). If you know free frequencies in your area, you can also set the frequency manually (see "CHANNEL menu item" or "TUNE menu item"). Step 2: Pairing a receiver - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 232
If you know free frequencies in your area, you can also set the frequency manually. ▷ EW-DX EM 2: "Ch 1 / Ch 2 -> Frequency menu item" ▷ EW-DX SKM(-S): "Making settings in the menu of the hand- held transmitter" ▷ EW-DX SK (3-PIN): "Making settings in the menu of the bodypack transmitter" Once you - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 233
Establishing a radio link | Synchronizing the receiver and transmitter The receiver's display shows that the synchronization process has started. The LED for the selected receiving channel flashes blue. ▷ Short-press the SYNC button on the transmitter. The blue DATA LED flashes. ► The transmitter - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 234
to establish a connection between a receiver and transmitters of the EW-DP EK series, the devices must always be synchronized with item"). If you know free frequencies in your area, you can also set the frequency manually (see "CHANNEL menu item" or "Frequency menu item"). Step 2: Pairing a receiver - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 235
Charging the BA 70 rechargeable battery in the L 70 USB charger Charging the BA 70 rechargeable battery in the L 70 USB charger Connecting/disconnecting the charger to/ from the power supply system To connect the charger to the power supply system: ▷ Use only the NT 5-20 UCW power supply unit from - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 236
Charging the BA 70 rechargeable battery in the L 70 USB charger Charging the rechargeable battery To charge the BA 70 rechargeable battery in the L 70 USB charger: ▷ Slide the rechargeable battery completely into the charging slot as shown in the figure. ► The rechargeable battery will begin - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 237
(3-PIN) bodypack transmitter or the BA 70 Front 1 Charging the EW-DX SKM(-S) handheld transmitter, the EW-DX SK (3-PIN) bodypack transmitter or the BA 70 rechargeable battery in the CHG 70N charger Product overview Back 1 2 2 3 45 1 Charging slots • See "Charging the - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 238
Charging the EW-DX SKM(-S) handheld transmitter, the EW-DX SK (3-PIN) bodypack transmitter or the BA 70 Connecting/disconnecting the charger to/ from the power supply system You can operate the charger either with the Sennheiser NT 1235 CS power supply unit or with Power over Ethernet (PoE IEEE 802. - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 239
Charging the EW-DX SKM(-S) handheld transmitter, the EW-DX SK (3-PIN) bodypack transmitter or the BA 70 Power over Ethernet (PoE) The charger can be powered via Power over Ethernet (PoE IEEE 802.3af Class 0). ▷ Connect the charger to a PoE-enabled network switch. 238 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 240
into your existing network infrastructure with any other types of devices. For more information about controlling devices via the Sennheiser Wireless Systems Manager or Sennheiser Control Cockpit software, refer to the instruction manual for the software. You can download the software here: www - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 241
the rechargeable battery You can use the CHG 70N charger to charge individual BA 70 rechargeable batteries, or to charge EW-DX SKM, EW-DX SKM-S, EW-DX SK or EW-DX SK 3-PIN transmitters with the BA 70 rechargeable battery already inserted. To charge the battery: ▷ Insert the individual rechargeable - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 242
-DX SKM(-S) handheld transmitter, the EW-DX SK (3-PIN) bodypack transmitter or the BA 70 Power saving mode In power saving mode, the transmitters are charged only once. The charger also - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 243
on and off" 2 LED: Operation indicator • See "Switching the EW-D ASA on and off" 3 4 BNC sockets B1 to B4 • RF outputs of diversity branch B for connection to the receiver • See "Connecting receivers to the EW-D ASA" 4 ANT RF IN B BNC socket • Antenna input of diversity branch B • See "Connecting - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 244
RF outputs of diversity branch A for connection to the receiver • Each one of these RF outputs can also provide power to an EW-D EM receiver • See "Connecting receivers to the EW-D ASA" 7 RF OUT A BNC socket • RF output only for connecting an additional ASA 214 to build an 8-channel diversity system - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 245
designed for your antenna splitter and ensures safe operation. To connect the EW-D ASA antenna splitter to the power supply system: ▷ Plug the unit and the other end to the wall socket. To completely disconnect the EW-D ASA antenna splitter from the power supply system: ▷ Unplug the power cable - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 246
receivers do not require their own power supply. They are powered via the BNC sockets A1 to A4. The EW-DX EM 2 receivers cannot be supplied with power via the BNC sockets. They need to be powered by the included power supply unit or by - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 247
EW-D ASA antenna splitter Connecting antennas To ensure optimal reception even an antenna amplifier to the BNC sockets ANT RF IN A and ANT RF IN B. ▷ Refer to the instructions under "Information on antenna amplifiers and cable lengths". Connecting rod antennas ▷ Mount the antennas to the BNC sockets - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 248
antenna amplifier as well as the maximum recommended cable lengths. Frequency range around 500 MHz 700 MHz 900 MHz 1800 MHz Number of EW-D AB 0 1 2 0 1 2 0 1 2 0 1 2 Max. cable length RG 58 GZL 5000 8 m 16 m 36 m 72 m 64 m 128 m 7 m 14 m 30 m 60 m 53 m 106 m 6 m 12 m 26 m 52 m 46 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 249
EW-D ASA antenna splitter Configuring multi-channel systems The following options for connecting multi-channel systems are possible: Option 1: Two antennas supply a 4-channel system 248 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 250
EW-D ASA antenna splitter Option 2: Two 4-channel systems are interconnected 249 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 251
EW-D ASA antenna splitter Option 3: Two antennas supply a 8-channel system 250 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 252
ASA antenna splitter Installing the EW-D ASA in a rack ATTENTION Rack mounting poses risks When installing the device in a closed 19" rack or multi-rack assembly, please consider that, during operation, - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 253
antenna splitter Switching the EW-D ASA on and off To switch on the antenna splitter: ▷ if they draw their supply voltage from the BNC sockets A1 to A4 (see "Connecting receivers to the EW-D ASA"). To fully switch off the antenna splitter: ▷ Disconnect the antenna splitter from the power supply - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 254
remove rechargeable batteries and batteries before you begin cleaning. ▷ Clean all products only with a soft, dry cloth. ▷ Note the special cleaning instructions below for the following products. Cleaning the sound inlet basket of the microphone module ▷ Unscrew the top sound inlet basket from the - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 255
Cleaning and maintenance ▷ Dry the top sound inlet basket and foam insert. ▷ Reinsert the foam insert. ▷ Screw the sound inlet basket back onto the microphone module. From time to time, you should also clean the microphone module contacts: ▷ Wipe the contacts of the microphone module with a soft, - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 256
FREQUENTLY ASKED QUESTIONS This section contains answers to frequently asked questions and further information about the following topics: „Radio and frequencies" „Audio" „Usability" „Accessories" „EW-D Smart Assist app" 255 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 257
to label transmission paths") How can I distinguish between my wireless links without displays on the transmitters? • EW-D SKM-S: „Identifying the paired receiver (Identify function)" • EW-D SK: „Identifying the paired receiver (Identify func- tion)" • Additional option: use color coding („Using - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 258
The transmitter and receiver are synchronized, but there is no connection. • Install antennas correctly on the receiver (EW-D EM: „Con- necting antennas" | EW-DX EM 2: „Connecting antennas") • EW-D: Use the scan function to find a free channel („AUTO SCAN menu item") and synchronize the transmitter - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 259
the receiver („AF OUT menu item") How do I adjust the settings so that my wireless link has the same volume as my guitar cable? • EW-D: Configure unity gain settings under the menu items GAIN (volume that reaches the receiver from the guitar through the bodypack transmitter - „GAIN menu item") and - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 260
the transmitter under the GAIN menu item („GAIN menu item") on the receiver. • EW-DX: In addition to the gain that is set in the receiver („Ch 1 / Ch 2 -> Gain menu item"), you can also set the trim on the transmitter (EW-DX SKM(-S): „Trim menu item" | EWDX SK (3-PIN): „Trim menu item") to adjust - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 261
function)" How do I know if my transmitter is switched on? • The transmitter's LINK LED lights up. • EW-D SKM-S: „Meaning of the LEDs" • EW-D SK: „Meaning of the LEDs" • EW-DX SKM(-S): „Meaning of the LEDs" • EW-DX SK (3-PIN): „Meaning of the LEDs" My LINK LED is steady or flashing yellow. What does - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 262
My LINK LED is steady or flashing red. What does that mean? • EW-D EM: „Meaning of the LEDs" • EW-D SKM-S: „Meaning of the LEDs" • EW-D SK: „Meaning of the LEDs" • EW-DX EM 2: „Meaning of the LEDs" • EW-DX SKM(-S): „Meaning of the LEDs" • EW-DX SK (3-PIN): „Meaning of the LEDs" Can I also operate an - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 263
each other. However, you can operate the two series in parallel without any problems. Are the receivers and transmitters of the EW-D and EW-DX series compatible? • „Information on compatibility between EW-D, EW-DX and EW-DP" How can I distinguish between my wireless links without displays on the - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 264
Usability What is the best way to wear the bodypack transmitter? • Do not kink, bend or cover the antenna • Avoid skin contact with the antenna • If possible, attach it to your clothing with the belt clip Can you rotate the bodypack transmitter's belt clip so that the antenna points downward? • Yes, - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 265
" Which microphone modules can I use with my handheld transmitter? • EW-D SKM-S: „Replacing the microphone module" • EW-DX SKM(-S): „Replacing the microphone module" Which batteries can I use for my transmitter? • 2 x AA 1.5 V or • Sennheiser BA 70 rechargeable battery („BA 70 recharge- able battery - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 266
antennas can I use with my receiver? • In principle, you can use all antennas with BNC connectors that cover the frequency ranges of the EW-D series („Frequency ranges") • Recommended: „Antennas" What are the advantages of the Half Wave Dipole rod antennas (available as accessories) compared to the - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 267
app. However, the app offers certain advantages (see „EW-DP 835 | Handheld Set"). I want to see if the app is right for me before registering. Where can I get more information? • In the app's demo mode or on the website: https://www.sennheiser.com/evolution-wireless-digital-app In which languages is - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 268
EW-D Smart Assist app Can I set a specific frequency range for the Auto Scan function? • No, the function available for iOS and Android. How can I display the app on a larger screen? • You can use a mirroring service such as QuickTime. Howev- er, you still control the app from the smartphone. 267 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 269
„System" „EW-D EM rack receiver" „EW-DX EM 2 rack receiver" „EW-D SKM-S handheld transmitter" „EW-DX SKM | EW-DX SKM-S handheld transmitter" „EW-D SK bodypack transmitter" „EW-DX SK | EW-DX SK 3-PIN bodypack transmitter" „EW-DP EK portable receiver" „EW-D ASA antenna splitter" „EW-D AB antenna - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 270
„BA 70 rechargeable battery" „L 70 USB charger" „CHG 70N charger" 269 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 271
-7: 630 - 662 MHz • S7-10: 662 - 693.8 MHz • U1/5: 823.2 - 831.8 MHz & 863.2 - 864.8 MHz • V3-4: 925.2 - 937.3 MHz • Y1-3: 1785.2 - 1799.8 MHz Audio-Link EW-DX frequency ranges • Q1-9: 470.2 - 550 MHz • R1-9: 520 - 607.8 MHz • S1-10: 606.2 - 693.8 MHz • S2-10: 614.2 - 693.8 MHz • S4-10: 630 - 693 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 272
Operating temperature range -10 °C - +55 °C (EW-D, EW-DP) -10 °C - +50 °C (EW-DX) Relative humidity 5 - 95% (non-condensing) System 271 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 273
EW-D EM rack receiver EW-D EM rack receiver Input voltage DC 11 - 13 V Input current ≤ 300 mA Transmission power BLE: max. 10 mW EIRP Audio output power 18 dBu max. Dimensions 212 × 44 × 189 mm (1 3/4" x 3 7/8" x 7 3/16") Weight Approx. 1000 g (without antennas and power supply unit) 272 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 274
2 rack receiver EW-DX EM 2 rack receiver Input voltage DC 11 - 13 V or PoE IEEE 802.3af Class 0 (CAT5e or higher) Input current ≤ 1A Transmission power BLE: max. - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 275
-D SKM-S handheld transmitter EW-D SKM-S handheld transmitter Input voltage 2.0 - 4.35 V Input current < 300 mA Power supply 2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack Occupied bandwidth 200 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 276
-DX SKM-S handheld transmitter EW-DX SKM | EW-DX SKM-S handheld transmitter Input voltage 2.0 - 4.35 V Input current < 300 mA Power supply 2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack Occupied bandwidth - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 277
SK bodypack transmitter EW-D SK bodypack transmitter Input voltage 2.0 - 4.35 V Input current < 300 mA Power supply 2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack Occupied bandwidth 200 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 278
SK 3-PIN bodypack transmitter EW-DX SK | EW-DX SK 3-PIN bodypack transmitter Input voltage 2.0 - 4.35 V Input current < 300 mA Power supply 2 AA batteries 1.5 V (alkali manganese) or BA 70 rechargeable battery pack Occupied - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 279
portable receiver EW-DP EK portable receiver Input voltage ~ 1.8 - 4.35 V Input current Typically < 250 mA / max. < 400 mA / max. < 750 mA (2x AA batteries) < 300 mA @ 5 V (USB-C standalone) - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 280
ASA antenna splitter Frequency ranges • EW-D ASA (Q-R-S): 470 - 694 MHz • EW-D ASA CN/ANZ (Q-R-S): 470 - 694 MHz • EW-D ASA (T-U-V-W): 694 - 1075 MHz • EW-D ASA (X-Y): 1350 - 1805 MHz EW-D ASA antenna splitter 2 x 1:4 or 1 x 1:8, active Gain • in A - out A: 0 ± 1 dB • in A - out A1 ... A4: 0 ± 1 dB - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 281
EW-D ASA antenna splitter Supply for antenna boosters at ANT RF in A and ANT RF in B • DC 12 V • 320 mA Supply for receivers at A1 to - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 282
Block diagram EW-D ASA antenna splitter 281 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 283
-D AB antenna booster Frequency ranges • EW-D AB (Q): 470 - 550 MHz • EW-D AB (R): 520 - 608 MHz • EW-D AB (S): 606 - 694 MHz • EW-D AB (U): 823 - 865 MHz • EW-D AB (V): 902 - 960 MHz • EW-D AB (Y): 1785 - 1805 MHz Power supply (DC coupled) DC 12 V (DC 9 - 18 V) / max. 160 mA @ 12 V, center contact - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 284
Storage temperature range -20 °C - +70 °C (-4 °F - 158 °F) Relative humidity 5 - 95% EW-D AB antenna booster 283 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 285
ADP UHF passive directional antenna (470 - 1075 MHz) ADP UHF passive directional antenna (470 - 1075 MHz) Frequency range 470 - 1075 MHz Apex angle (-3 dB) Approx. 100° Front-to-back ratio > 14 dB Gain Typically 5 dBi Impedance 50 ? Connection BNC female, no DC path Threads for tripod mounting 3/8" - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 286
ADP UHF passive directional antenna (470 - 1075 MHz) Relative humidity 5 - 95% Typical polar diagram ► 285 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 287
BA 70 rechargeable battery BA 70 rechargeable battery Rated capacity 1720 mAh Nominal voltage 3.8 V Charging voltage max. 4.35 V Charging time Typically 3 h @ room temperature Dimensions Approx. 54 x 30 x 15 Weight Approx. 33 g Temperature range • Charging: 0 °C - +55 °C (32 °F - 131 °F) • - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 288
L 70 USB charger L 70 USB charger Charging capacity 2 Sennheiser BA 70 rechargeable battery packs Input voltage Typically 5 V Input current max. 2 A Charging voltage nominally 4.35 V Charging current max. 860 mA per battery pack Charging time - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 289
duplex) 10Base-T (half+full duplex) Dimensions Approx. 200 x 104 x 116 mm Weight approx. 640 g Charging slots 2 Charging capacity per slot BA 70 rechargeable battery or EW-DX SK with BA 70 or EW-DX SKM with BA 70 Charging voltage 4.35 V 288 - Sennheiser EW-DX EM 2 Dante | Instruction manual and frequently asked questions - Page 290
Charging current min. 344 mA max. 860 mA Full charging time Max. 3.5 h Temperature range • Charging: -10 °C to +50 °C • Storage: -20 °C to +70 °C Relative humidity max. 95% (non-condensing) CHG 70N charger 289
Evolution Wireless Digital
EW-D | EW-DX | EW-DP
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com
EW-D | EW-DX | EW-DP - v3.0 (04/2023)
Instruction manual
(PDF export of the original HTML manual)
This PDF document is a PDF export of an interactive manual in HTML format.
When displayed in PDF format, it is possible that not all content and interactive
elements in the HTML instructions are included, as these cannot be displayed in
PDF format.
We recommend using the complete and interactive HTML instructions.
You can find these in the Sennheiser Documentation App, which is available free of
charge for iOS and Android. Alternatively, the HTML instructions are also available
in the download area of the product page:
www.sennheiser.com/ew-d
www.sennheiser.com/ew-dx
www.sennheiser.com/ew-dp