Schwinn Airdyne AD2 2012 model Service Manual - Page 19
Replacing the Fan Covers
![]() |
View all Schwinn Airdyne AD2 2012 model manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Replacing the Fan Covers Disconnect the data cable from the console before you service this machine. Note: Your machine may not match the image. For reference only. To remove the Front Fan Cover: Tools required: pedal wrench, #2 Phillips screwdriver 1. Remove the Pedals. Refer to the "Replacing the Pedals" procedure in this manual. 2. Carefully remove the Shrouds. Refer to the "Replacing the Shrouds and Vent Cover" procedure in this manual. Set the hardware safely aside for reassembly. Note: The hardware that attaches the Front Fan Cover is removed during Shroud removal. 3. Slide the Front Fan Cover forward to disengage the tabs from the Frame brackets. Lift slightly to disengage from the screws inside the Frame uprights, and remove it. 4. Installation is the reverse procedure. Note: Be sure the Frame brackets go into the tabs on the Front Fan Cover. 19
![](/manual_guide/products/schwinn-airdyne-ad2-2012-model-service-manual-9910699/19.png)