Sanyo VPC-CA9BK Instruction Manual, VPC-CA9EX Software - Page 12

3 Select "COMPUTER", and press the SET button. USB CONNECTION h The screen to select the computer CARD READER connection mode appears. MTP CARD READER: Use the camera as an external drive of the computer. SCREEN CAPTURE PC CAMERA CANCEL MTP: OK Connect the camera in the MTP mode to a Windows Vista computer. SCREEN CAPTURE: Save an image of the computer screen in your camera. PC CAMERA: Use your camera as a PC camera. 4 Select the desired connection mode, and press the SET button. CAUTION Insert and pull out the cable carefully i When connecting the cables, make sure that the cable plugs are correctly oriented and that they match the shapes of the terminal sockets on the devices. Push the plugs in straight when connecting them. If undue force is used to connect a cable, it may permanently damage the connector pins in the terminal socket. i Do not use excessive force when connecting and disconnecting cables. i Please connect the dedicated USB interface cable to your computer's USB connector. Do not connect it to the USB port on your monitor or keyboard, or to the USB hub. Be especially careful when installing the driver software. In some instances, it may not be possible to correctly install the driver software. Do not exchange data bi-directionally i While copying data from the camera to the computer in the card reader mode, do not perform any operation that would copy the computer data to the camera. English 10