Sanyo PLV-HD100 RS232C - Page 7
INPUT 1 Command, INPUT 2 Command, INPUT 3 Command
![]() |
View all Sanyo PLV-HD100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Temperature Abnormal Temperature NONE Mode switching process NONE Cooling Down process with Power Save NONE Power Save C00: POWER ON C01: POWER OFF Note) In the above status, even if the projector receives the other command, the projector returns [ACK] [CR]. INPUT 1 Command COMMAND "C05" [CR] Details Select Slot 1 input. Note) When there is no card inserted to Slot 1, no operation occcurs. Return Value Acceptable [ACK] [CR] Unacceptable "?" [CR] INPUT 2 Command COMMAND "C06" [CR] Details Select Slot 2 input. Note) When there is no card inserted to Slot 2, no operation occurs. Return Value Acceptable [ACK] [CR] Unacceptable "?" [CR] INPUT 3 Command COMMAND "C07" [CR] Details Select Slot 3 input. Note) When there is no card inserted to Slot 3, no operation occurs. Retrun Value Acceptable [ACK] [CR] Unacceptable "?" [CR] Ver. Rev.A Page 7 / 18
![](/manual_guide/products/sanyo-plvhd100-rs232c-c74748c/7.png)