Sanyo PLC-XW250 RS232 Basic - Page 4
Overview, Serial Interface Specifications, 1. Transfer Specifications, 2. Connection, Projector, COM
UPC - 086483074776
View all Sanyo PLC-XW250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
PLC-XW200/250 Basic Serial Command Specifications 1. Overview 1.1. These specifications define projector control commands for PLC-XW200/250. 1.2. The projector control commands are used to remotely control a projector through RS-232C from a computer. 2. Serial Interface Specifications 2.1. Transfer Specifications Item Specifications Synchronous system Asynchronous Transmission Speed 9600 / 19200 Data Length 8 bit Parity N/A Stop Bit 1 Flow Control N/A 1) Transmission speed: initial setting value is 19200. 2) Transmission speed can be changed in service mode. 2.2. Connection Dedicated serial cable must be used for connection to a computer and a projector. PC COM 1 Projector Control Port D-Sub 9 Pin D-Sub 9 Pin 3/22
PLC-XW200/250
Basic Serial Command Specifications
3/22
1. Overview
1.1. These specifications define projector control commands for PLC-XW200/250.
1.2. The projector control commands are used to remotely control a projector through RS-232C from a
computer.
2. Serial Interface Specifications
2.1. Transfer Specifications
Item
Specifications
Synchronous system
Asynchronous
Transmission Speed
9600 / 19200
Data Length
8 bit
Parity
N/A
Stop Bit
1
Flow Control
N/A
1) Transmission speed: initial setting value is 19200.
2) Transmission speed can be changed in service mode.
2.2. Connection
Dedicated serial cable must be used for connection to a computer and a projector.
PC
Projector
COM 1
Control Port
(
D-Sub 9 Pin
)
(
D-Sub 9 Pin
)