Sanyo PLC-XU350A Owner's Manual PJ net Windows - Page 14
Stopping monitoring the target, Displaying all the status information of the target
UPC - 086483076329
View all Sanyo PLC-XU350A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Chapter 3 Basic Operation Stopping monitoring the target To stop monitoring the target, click button again on the tool bar. Displaying all the status information of the target Select a target and click button on the tool bar. The following status window appears and displays all the available status information of the target. 0 The target name and item which have an abnormality or connection error happening are indicated with red. 0 When PJ Net wor k M anager cannot acquire the value of column information, "---" is displayed. 0 The above procedure can perform by selecting Target display from Display menu. Setting the target group The target group can be set up by the procedure below. When you set a command in the same group, you set it. 1 Select targets which you want to set from the status list. Select Group setting from Target menu, the dialog box will appear as the below figure. 2 Select a group, and then click OK button. 0 " ---" will not set the group. 0 The projectors setting different network passwords cannot be set to the same group. It is necessary for the projectors in the same group to set to the same password. 14