Sanyo PLC-XU300A RS232 Basic - Page 20
Status Read Command, 1. Format, 2. Transfer Example
![]() |
UPC - 086483076336
View all Sanyo PLC-XU300A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
PLC-XU300/350 Basic Serial Command Specifications 7. Status Read Command 7.1. Format 7.1.1. PC issues commands in format as below; "CR" Command [CR] Command 1 character See Basic Status Read Command Table 7.1.2. When a projector receives the appropriate command, it returns a character line as the required data. Required Data [CR] Required Data A character line See Basic Status Read Command Table 7.1.3. When the received data cannot be decoded, the projector returns "?" [CR]. 7.2.Transfer Example Get input mode for projector with basic commands PC → Projector Projector → PC Command issues a command of getting current input mode "C" "R" "1" "CR" "1" "CR" Processing Response (A few ms 1s) Shows Computer 1 is selected 19/23
![](/manual_guide/products/sanyo-plcxu350a-rs232-basic-3331bad/20.png)
PLC-XU300/350
Basic Serial Command Specifications
19/23
7. Status Read Command
7.1. Format
7.1.1.
PC issues commands in format as below;
“CR” Command [CR]
Command
�
1 character
�
See Basic Status Read Command Table
�
7.1.2.
When a projector receives the appropriate command, it returns a character line as the
required data.
Required Data [CR]
Required Data
�
A character line
�
See Basic Status Read Command Table
�
7.1.3.
When the received data cannot be decoded, the projector returns
“?”
[CR]
.
7.2. Transfer Example
Get input mode for projector with basic commands
Command
�
issues a command of getting current input mode
�
PC
→
Projector
“C”
“R”
“1”
“CR”
Projector
→
PC
“1”
“CR”
Processing
Response
(A few ms
~
1s)
(
Shows Computer 1 is selected
)