Sanyo PLC-WTC500AL RS232C Expand - Page 18
CF_SHARP Command, 4.6 CF_GAMMA Command, 4.7 CF_WBAL- Command
![]() |
UPC - 086483076442
View all Sanyo PLC-WTC500AL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
PLC-WTC500L Expand Serial Command Functional Specifications 8.4.5 CF_SHARP Command Command "CF_SHARP_%1" [CR] "000-015 Directly specify setting value of Sharpness %1 "UP Increment setting value of Sharpness by 1 "DN Decrement setting value of Sharpness by 1 Details Response Set user controlled value of Sharpness (Available only in the normal Power ON status) The value set by this command will not be stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It is stored in Suspend mode.) Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.4.6 CF_GAMMA Command Command "CF_GAMMA_%1" [CR] "000-015 Directly specify setting value of Gamma %1 "UP Increment setting value of Gamma by 1 "DN Decrement setting value of Gamma by 1 Details Set user controlled value of Gamma (Available only in the normal Power ON status) The value set by this command will not be stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It is stored in Suspend mode.) Acceptable "000" [CR] Response Unacceptable "Error Code" [CR] 8.4.7 CF_WBAL- Command Command "CF_WBAL-%1_%2" [CR] "R" --------- RED %1 "G" --------- GREEN "B" --------- BLUE "000-063"------ Directly specify value of Color selected in %1 of White Balance. %2 "UP"---------Increment setting value of Color specified in %1 of White Balance by 1. "DN"-------- Decrement setting value of Color specified in %1 of White Balance by 1. Details Set value of Color specified in %1 of White Balance (Available only in the normal Power ON status) The value set by this command will not be stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It is stored in Suspend mode.) Acceptable "000" [CR] Response Unacceptable "Error Code"[CR] 18/75
![](/manual_guide/products/sanyo-plcwtc500l-rs232c-expand-a02ec6b/18.png)