Sanyo PLC-WL2500 RS232C Expand - Page 45
Other Command, 11.1 CF_KEYENU Command, 11.2 CF_MENU Command, 11.3 CF_POWER Command
UPC - 086483078859
View all Sanyo PLC-WL2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
PLC-WL2500 / WL2501 Expand Serial Command Functional Specifications 8.11 Other Command 8.11.1 CF_KEYENU Command Command "CF_KEYENU_%1"[CR] "RIGHT Shift Pointer on OSD Menu to right "LEFT Shift Pointer on OSD Menu to left %1 "UP Shift Pointer on OSD Menu to right "DN Shift Pointer on OSD Menu to right "SELECT Behave the same as Select key. "AUTOPC Execute Auto PC adj. Details This command behave the same as corresponding RC/Projector keys Once Auto PC adj. is started with "AUTOPC" command, it does not stop with receiving the command another time. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.11.2 CF_MENU Command Command "CF_MENU_%1"[CR] %1 "ON Display OSD Menu "OFF Cancel OSD menu Details Display / Cancel On Screen Display Menu This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.11.3 CF_POWER Command Command "CF_POWER_%1"[CR] "ON Power ON projector "OFF Power OFF Projector Note1) Countdown can be terminated by sending this command. %1 Note2) Projector returns error code due to unable of command execution depends on its condition. Note3) Although projector returns "OK", operation may not be proceeding properly. (e.g. After returning "000" for Power ON command, projector gets abnormal temperature.) Use Status read command to get projector states. Details Power ON / OFF projector. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 44/72