SanDisk SDSDB-016G-A11 Product Manual - Page 36
Supported Card Command Classes
UPC - 619659055639
View all SanDisk SDSDB-016G-A11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Revision 2.2 Chapter 3 - SD Card Interface Description SD Card Product Manual Table 3-15 CCC Bit 0 1 11 Supported Card Command Classes Class 0 Class 1 Class 11 Supported Card Command Class ---- • READ_BL_LEN-The maximum read data block length is computed as 2READ_BL_LEN. The maximum block length might therefore be in the range 512...2048 bytes. In the SD Memory Card, the WRITE_BL_LEN is always equal to READ_BL_LEN. Table 3-16 Data Block Length READ_BL_LEN 0 to 8 9 ...... 11 12-15 Reserved 2 * 512 bytes 211 = 2048 bytes Reserved Block Length • READ_BL_PARTIAL-defines whether partial block sizes can be used in block read commands. Table 3-17 Bit Definition READ_BL_PARTIAL 0 1 Definition Only the READ_BL_LEN block size can be used for block-oriented data transfers. Smaller blocks can be used. The minimum block size will be equal to minimum addressable unit (one byte). • WRITE_BLK_MISALIGN-Defines if the data block to be written by one command can be spread over more than one physical block of the memory device. The size of the memory block is defined in WRITE_BL_LEN. Table 3-18 Bit Definition WRITE_BLK_MISALIGN 0 1 Definition Crossing physical block boundaries is invalid. Crossing physical block boundaries is allowed. • READ_BLK_MISALIGN-defines if the data block read by one command can be spread over more than one physical block of the memory device. The size of the memory block is defined in READ_BL_LEN. Table 3-19 Bit Definition READ_BLK_MISALIGN 0 1 Definition Crossing physical block boundaries is invalid. Crossing physical block boundaries is allowed. © 2004 SanDisk Corporation 3-16 12/08/04