SanDisk M250 User Manual - Page 9

Voice recording To record your voice as file to your player. Follow these steps: 1. Press the Power/Menu Button once. The SanDisk logo and Sansa logo will briefly appear onscreen then disappear. (Can't find the Power/Menu Button on your player? See The Basic Controls section on page 3.) WARNING: If the onscreen message says "Locked" and then shuts off, you need to locate the Hold Button on the left side of your player. Slide that button left to unlock your device. Then repeat Step 1 above. See The Basic Controls section on page 3 if you cannot find the Hold Button. NOTE: If you do not see the Recorder onscreen, briefly press the Power/Menu Button on the right side of your player. The software Menu will appear. Use the Repeat/AB/Down Button to scroll and highlight Modes. Press the Select Button to select Modes. Press the Play/Pause/Up Button to scroll then highlight the Recorder mode. Press the Select Button to enter Recorder mode. 2. Press the Power/Menu Button briefly to access the software Menu then use the Modes setting to switch to Recorder. 3. Press the Play/Pause/Up Button to start recording. 4. During the recording, If the Play/Pause/Down Button is pressed, the recording will be paused. If the Play/Pause/Down Button is pressed again, the recording will resume. 5. To stop recording: „ Press the Repeat/AB/Down Button. 6. Saving your recording: „ Once the recording has been stopped you'll be presented with a message asking you if you'd like to save the recording. Use the Next/Fast Forward and Previous/Fast Reverse buttons to move the highlight between the X and check boxes. To save the recording, press Select with the check box highlighted. To return to the recorder without saving, press Select with the X box highlighted. You can play back your saved recordings under the Play Music menu. Quick Start ` 8