Samsung WF50A8800AV/US User Manual - Page 24
STEP 3, Adjust the leveling feet, Connect the water hose
![]() |
View all Samsung WF50A8800AV/US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
English Installation STEP 3 Adjust the leveling feet 1. Gently slide the washer into position. Excessive force may damage the leveling feet. 2. Using a wrench, turn the leveling feet clockwise or counterclockwise to adjust the height until the washer is level. 3. Using a flathead screwdriver, tighten the locking nuts (A). NOTE Use the open-end of the supplied wrench to adjust the leveling feet. STEP 4 Connect the water hose B A CAUTION • Make sure to use new water hoses and that rubber gaskets (B) are inside the couplings (A) at both ends of the hoses. Water hoses without the gaskets may leak. • Allow 5 in. (127 mm) of space between the back of the washer and the wall to prevent water hoses from being kinked. Kinked hoses may cause water leaks. • If there is a water leak, stop using the washer and contact a local Samsung service center. A water leak may cause electric shock. • Do not stretch the water hoses by force. If a hose is too short, replace the hose with a longer hose. 24 English Untitled-13 24 2021-02-19 6:21:48
![](/manual_guide/products/samsung-wf50a8800avus-user-manual-606eca7/24.png)